All finds recorded in the Parliamentary constituency of Cannock Chase - Page: 1

Finds within constituency of Cannock Chase

A complete list of all finds recorded
Image	Object Type	Find number	Broadperiod	County	Actions
	Buckle	WMID-196944	Post medieval	Staffordshire	xml \| csv json
An incomplete cast copper alloy sub rectangular openwork buckle frame, with a separate spindle, of Post medieval dating (c. 1720s - c. 1790s AD). Approximately 25% of the buckle frame is present. The pin, spindle and buckle plate are missing. The frame is L shaped in plan. It consists of an openw...
	Figurine	WMID-B76FD0	Roman	Staffordshire	xml \| csv json
A broken lead cast figurine of a standing female figure. It measures 52.98 mm long, 24.27 mm wide, 8.27 mm thick and weighs 25.4 grams. The figurine is in classical style and a crude crest on the top of the head may suggest the helmeted figure of the goddess Minerva. The figure is draped with a b...
	Coin	CCI-99066	Iron age	Staffordshire	xml \| csv json
No description recorded
	Key (locking)	LEIC-EA9D46	Medieval	Staffordshire	xml \| csv json
Medieval copper alloy key, 82mm long, 28mm wide and 12mm thick The object is in fair condition and weighs 34.68grams. The key has a lozenge shaped loop with a cricular sectioned shaft and a rectangular bit two clefts one on the outer and lower edge.
	Ring	WMID-4D9E60	Medieval	Staffordshire	xml \| csv json
A cast copper alloy ring of uncertain function, possibly medieval or post medieval in date. The ring is sub-circular in plan, with two slightly flattened portions of the external circumference which meet at an angle of approximately 45 degrees. In section, the external circumference of the ring ...
	Coin	WMID-F590B5	Post medieval	Staffordshire	xml \| csv json
A complete but extremely worn silver sixpence of William III (1694-1702). Diameter: 21.6mm. Mass 2.6g.
	Weight	WMID-683EC2	Medieval	Staffordshire	xml \| csv json
An incomplete cast copper alloy probable medieval cup weight. The object has a circular (although incomplete) rim, tapering sides and a flat circular base. On opposite points of the outside of the rim are two parallel lugs orientated vertically. These have rounded edges, although one has a sma...
	Spur	LVPL-8AB444	Post medieval	Staffordshire	xml \| csv json
Cast copper alloy fragment from a Post-Medieval rowel spur. It is L-shaped in plan with only the spur neck and spur box remaining. The spur neck is circular in section and widens in the middle. At the junction between the neck and the box the fragment bends 90 degrees. There is a circular knob...
	Token	WMID-E34A97	Post medieval	Staffordshire	xml \| csv json
A cast lead (alloy?) token. The front of the token has a raised border, a concentric ridge within, and a face in relief at the centre. In terms of the face, three pellets form the eyes and a nose, and a mouth is formed from two broadly horizontal ridges. There may also be vertical ridges, at the...
	Brooch	WMID-E26F22	Roman	Staffordshire	xml \| csv json
An incomplete cast copper alloy Roman brooch of Polden Hill type. The wings are semi-cylindrical with one complete and one incomplete perforated cap at the terminals. The axis bar, securing the (disarticulated) spring, is held within the perforated end caps. The copper alloy wire of the spring a...
	Strap fitting	WMID-95C2C1	Post medieval	Staffordshire	xml \| csv json
A complete cast copper alloy belt fitting or suspension loop, dating to the 17th/ 18th century AD (length: 24.5mm; width: 50mm; thickness/ diameter of suspension loop: 10.5mm; weight: 7.20g). Of sub rectangular form with a circular suspension loop at the top, this artefact is in a worn and corro...
	Cauldron	WMID-958052	Medieval	Staffordshire	xml \| csv json
A complete cast copper alloy cauldron leg, dating to the 15th/ 16th century AD (length: 86mm; width at base: 56mm; thickness at base: 36mm; weight: exceeds weight of scales). This large paw-shaped cauldron leg/ foot has the toes well pronounced near the base of the artefact with a slight ridge (b...
	Cauldron	WMID-958052	Medieval	Staffordshire	xml \| csv json
A complete cast copper alloy cauldron leg, dating to the 15th/ 16th century AD (length: 86mm; width at base: 56mm; thickness at base: 36mm; weight: exceeds weight of scales). This large paw-shaped cauldron leg/ foot has the toes well pronounced near the base of the artefact with a slight ridge (b...
	Cauldron	WMID-958052	Medieval	Staffordshire	xml \| csv json
A complete cast copper alloy cauldron leg, dating to the 15th/ 16th century AD (length: 86mm; width at base: 56mm; thickness at base: 36mm; weight: exceeds weight of scales). This large paw-shaped cauldron leg/ foot has the toes well pronounced near the base of the artefact with a slight ridge (b...
	Seal	WMID-F393E1	Post medieval	Staffordshire	xml \| csv json
An incomplete cast copper alloy seal, dating to the 17th century AD (length: 22.1mm; width at handle: 11.7mm; thickness at handle: 3.2mm; diameter at base: 12.3mm; weight: 2.46g). A circular-sectioned handle which expands at the top into the remains of a flat trefoil suspension loop. The base o...
	Ring	WMID-F2A3E7	Roman	Staffordshire	xml \| csv json
An incomplete cast leaded bronze ring, possibly dating to the 1st/ 2nd century AD (diameter: 47.9mm; thickness: 14.3mm; weight: 42g). There is ribbed moulding around the perimeter of the artefact, particularly around the centre where there is a protruding ridge. There is no decoration on the ind...
	Coin	WMID-F1D212	Roman	Staffordshire	xml \| csv json
An incomplete struck/ hammered bronze sestertius, dating to the 1st/ 2nd century AD (diameter: 31.7mm; thickness: 3.9mm; weight: 19.83g). Very little detail remains and the coin is in a worn and corroded condition.
	Cauldron	WMID-F17487	Medieval	Staffordshire	xml \| csv json
An incomplete cast copper alloy cauldron leg, dating to the 15th/ 16th century AD (length: 65mm; width at base: 57.8mm; thickness at base: 33mm; weight: exceeds weight of scales). This large paw-shaped cauldron leg/ foot has the toes well pronounced from the top right down to the base, and the a...
	Cauldron	WMID-F17487	Medieval	Staffordshire	xml \| csv json
An incomplete cast copper alloy cauldron leg, dating to the 15th/ 16th century AD (length: 65mm; width at base: 57.8mm; thickness at base: 33mm; weight: exceeds weight of scales). This large paw-shaped cauldron leg/ foot has the toes well pronounced from the top right down to the base, and the a...
	Brooch	NCL-2521B8	Roman	Staffordshire	xml \| csv json
A copper alloy Roman umbonate brooch, dating from the 2nd to mid-3rd century. The brooch comprises a circular plate, which is domed and has a hollow back. A suspension loop with a circular perforation projects from the brooch at one end, whilst a damaged semi-circular lug projects at the other en...