All finds recorded in the Parliamentary constituency of Ashford - Page: 1

Finds within constituency of Ashford

A complete list of all finds recorded
Image	Object Type	Find number	Broadperiod	County	Actions
	Coin	KENT-CB0273	Iron age	Kent	xml \| csv json
An Iron Age silver unit of Verica, struck in the name of Eppilus dating to the period c. 20 BC to AD 40. Obv: Head right. VIR Rev: Capricorn left EPPI above; COMF below. ABC p. 43, no. 435
	Metal working debris	LVPL-4F3F46	Unknown	Kent	xml \| csv json
Three fragments of iron metal working waste. The objects are sub-oval in plan and are dark brown in colour. Each piece is pitted but not corroded. Found within the same area the pieces indicate possible metal working. The date is unknown. Large piece: 33.01mm in length, 30.23mm in width, 5.71mm ...
	Metal working debris	LVPL-4F3F46	Unknown	Kent	xml \| csv json
Three fragments of iron metal working waste. The objects are sub-oval in plan and are dark brown in colour. Each piece is pitted but not corroded. Found within the same area the pieces indicate possible metal working. The date is unknown. Large piece: 33.01mm in length, 30.23mm in width, 5.71mm ...
	Metal working debris	LVPL-4F3F46	Unknown	Kent	xml \| csv json
Three fragments of iron metal working waste. The objects are sub-oval in plan and are dark brown in colour. Each piece is pitted but not corroded. Found within the same area the pieces indicate possible metal working. The date is unknown. Large piece: 33.01mm in length, 30.23mm in width, 5.71mm ...
	Lithic implement	LVPL-4F0166	Neolithic	Kent	xml \| csv json
Flint knapping waste probably dating from the Neolithic to the early Bronze Age. The object is sub-oval in plan and lozenge shaped in cross-section. On one face of the object is a large bulb of percussion. The object has not been retouched and is probably a waste flake. It has been made from mott...
	Lithic implement	LVPL-4EDCE2	Mesolithic	Kent	xml \| csv json
Flint knapping waste probably dating from the Neolithic to the early Bronze Age. The object is sub-oval in plan and lozenge shaped in cross-section. On one face of the object is a large bulb of percussion. The object has not been retouched and is probably a waste flake. It has been made from mot...
	Lithic implement	LVPL-4D6DD3	Mesolithic	Kent	xml \| csv json
Flint implement dating from the Neolithic to early Bronze Age, (2500-1500BC). The object is sub-oval in plan and sub triangular in cross-section. A light brown cortex remains on one face of the object. A few chips are missing from the long edge with no cortex however it is uncertain whether thes...
	Lithic implement	LVPL-4D5031	Mesolithic	Kent	xml \| csv json
Flint blade dating to the early Prehistoric period, c5000-3000BC. The object is sub-rectangular in plan and triangular in cross-section. The lower (ventral) face of the object is smooth. Two long flakes have been removed to create the upper (dorsal) face of the object on which small ripples can b...
	Lithic implement	LVPL-4D3B46	Mesolithic	Kent	xml \| csv json
Flint blade dating to the early Prehistoric period, c5000-3000BC. The object is sub-rectangular in plan and triangular in cross-section. Three long flakes have been removed from the upper (dorsal) face. Ripples are visible on the upper face. The long straight edge has been lightly retouched and ...
	Lithic implement	LVPL-4D1028	Mesolithic	Kent	xml \| csv json
Flint implement dating to the early Prehistoric period, c.5000-3000BC. The object is sub-oval in plan and trapizodial in cross-section. The remains of a light brown cortex remains on one face. Small flakes have been removed from each face of the object. The object has been retouched next to the ...
	Lithic implement	LVPL-4CC2E5	Mesolithic	Kent	xml \| csv json
Flint blade dating to the early Prehistoric period, c.5000-3000BC. The implement is sub-oval in plan and D-shaped in cross-section. It is curved in profile. Three long flakes have been struck away from the dorsal (upper) face. There is some retouch on each edge of the blade. The flint has been us...
	Coin	PUBLIC-119341	Post medieval	Kent	xml \| csv json
A complete post medieval threepence of Elizabeth I (1558-1603 AD), initial mark coronet, dated 1568 AD on coin, North 1998
	Coin	PUBLIC-112C85	Medieval	Kent	xml \| csv json
A Medieval Venetian silver soldino of Doge Leonardo Loredan (1501-1521).
	Coin	PUBLIC-10E372	Medieval	Kent	xml \| csv json
An incomplete Medieval silver short cross cut farthing of Henry II to Henry III (1154-1272 AD), 1180-1247 AD.
	Harness fitting	KENT-C01CA0	Iron age	Kent	xml \| csv json
A complete cast copper-alloy mini terret, dating to the late Iron Age/early Roman periods. The terret is sub-circular in plan, with a flattened attachment side, and is D-shaped in cross section, with a flat lower surface. The flattened side which would have taken a strap is narrowed and reces...
	Coin	PUBLIC-806BA6	Medieval	Kent	xml \| csv json
A Medieval silver voided long cross cut farthing of Henry III (1216-1272 AD), minted by Nicole at canterbury, shrewsbury or winchester. 1247-1272 AD.
	Coin	PUBLIC-6AA222	Medieval	Kent	xml \| csv json
Medieval silver halfpenny of Edward IV probably second reign (1471-1483 AD), minted at London, initial mark unclear or possibly absent, North 1667
	Powder flask	PUBLIC-4FB166	Post medieval	Kent	xml \| csv json
An incomplete Post Medieval cast lead Powder Flask cap, circa 1600 AD - 1700 AD. One of the integral loops that attached the cap to a bandolier is missing. The cap secured the mouth of a flask, that held a single charge of gunpowder for a Musket. Sometimes up to twelve such flasks were attached t...
	Seal box	KENT-6A7E00	Roman	Kent	xml \| csv json
An incomplete Roman copper alloy seal box lid. It is circular in plan with a worn edges . There is an incomplete hinged fitting projecting 8.6mm from the edge . The upper surface has a molded design formed of a reverse "S" shaped raised panel creating two semi-circular shaped fields either si...
	Finger ring	KENT-591022	Roman	Kent	xml \| csv json
A zooamorphic terminal from a Roman silver Finger Ring or Bracelet. The terminal is oval in plan with a curved, convex cross section. It is moulded in the shape a stylised snake head with elongated pellets suggesting eyes, nose and the top of the head. The terminal has broken away from the rest o...
	Key (locking)	KENT-58B483	Roman	Kent	xml \| csv json
A Roman copper alloy Key handle in the form of a lion. The key handle has a large square shaped socketed shank with some iron staining around the inside and on the edges; part of the shank has been broken away. The iron art of the key is now missing. The shank becomes the head and front of the l...
	Hook	KENT-C6DF15	Post medieval	Kent	xml \| csv json
An Incomplete Post-Medieval cast copper-alloy hook. The hook has a four-looped openwork design, with a small circular attachment knop. The actual hook is missing. The breaks are rolled and the whole object is covered in corrosion products. This is likely to date from circa 1500 to 1650. Similar h...
	Hook	KENT-C646E5	Post medieval	Kent	xml \| csv json
An incomplete Post-Medieval cast copper alloy hook. The head is square with molded decoration of openwork circles, possibly a floral pattern, and checkerboard pattern sitting in a large V underneath. The hook is long but has been broken. The terminal is rolled. There is surface corrosion througho...
	Buckle	KENT-C4B640	Post medieval	Kent	xml \| csv json
An incomplete Post-Medieval cast copper alloy buckle. The frame has rounded ends and concave sides, and is slightly rounded in profile. The inside ends are concave.The bar and pin are missing. There are lobed knops at the bar terminations. The buckle is incomplete with surface corrosion on the fr...
	Buckle	KENT-C408C1	Post medieval	Kent	xml \| csv json
A fragment of a Post-Medieval cast copper alloy buckle. The fragment comes from the loop of the buckle, and resembles a single-loop sub-rectangular buckle with concave sides.It is missing the rest of the frame, the bar and the pin. The object is not corroded and the breaks are slightly worn. So...
	Buckle	KENT-C38152	Post medieval	Kent	xml \| csv json
An incomplete Post-Medieval cast copper alloy buckle. The sides of the frame have been made in two different shapes. The long sides are thin, flat and terminate in rounded knops, while the short sides are thicker and rounded. The bar is recessed. The pin is missing. The buckle is in good conditio...
	Buckle	KENT-C2F5E7	Medieval	Kent	xml \| csv json
A complete Medieval cast copper alloy buckle. It is rectangular and single-looped in shape with bevelled edges. The pin is intact and is wrapped around the frame. The buckle is in good condition with some light surface corrosion. It is likely to date from the Medieval period, from circa 1300-1500...
	Buckle	KENT-C23543	Post medieval	Kent	xml \| csv json
A complete Post-Medieval cast copper alloy buckle. The buckle is oval double-looped in shape, and is possibly Baldrick. The bar is slightly recessed and the pin attached by wrapping it around the bar. There is no visible decoration, but most of the buckle has surface corrosion. It is likely to...
	Buckle	KENT-B10B17	Post medieval	Kent	xml \| csv json
An incomplete Post-Medieval cast copper alloy buckle. It is double loop and oval-shaped with only one loop of the frame remaining. Frame is bent, possibly part of the design, and has a small knop at the middle of the outer edge of the loop. The narrow bar is recessed and has a small knop at e...
	Buckle	KENT-AE6013	Post medieval	Kent	xml \| csv json
An incomplete Post-Medieval copper alloy cast buckle. It is trapezoidal in shape with a double-looped frame. The frame is incomplete and retains one loop of the double loop frame, as well as the bar and pin. The reverse is flat and undecorated. The end is pointed and each corner terminates in an ...