All finds recorded in the Parliamentary constituency of Arundel and South Downs - Page: 20

Finds within constituency of Arundel and South Downs

A complete list of all finds recorded
Image	Object Type	Find number	Broadperiod	County	Actions
	Vessel	SUSS-528C27	Medieval	West Sussex	xml \| csv json
Five sherds including three rim sherds of mid-late 12th to mid-late 13th century, flint and sand tempered wares.local glazed red earthen wares. two rims are rolled outwards and flat at an angle of 50 degrees. The other rim is rolled out to about 60 degrees and has a small outer lip. Orange fabric...
	Vessel	SUSS-424F02	Post medieval	West Sussex	xml \| csv json
Two sherds of locally made glazed red earthenware vessels dating from the late 16th to early 18th century. One has a distinct carination in profile and may be part of a base but it is too small to estimate the diameter. The possible base piece has a mid brown glaze anbd weighs 8.10 grams. The oth...
	Vessel	SUSS-3FEA01	Medieval	West Sussex	xml \| csv json
Two fragments of cast copper alloy which appear to be from the same object although they do not fit together. Both are flat with irregular breaks on three sides and a bevelled rim on the fourth; they have multiple rough casting lines parallel to the rim. The larger piece is 75.7mm long, 48.2mm wi...
	Cloth seal	SUSS-3FBEC6	Post medieval	West Sussex	xml \| csv json
Lead alloy disk, one side of a Medieval or Post Medieval cloth seal with part of the central rivet attached to one side which also has an impression of the weave of the cloth; possibly a tabby weave although worn and unclear. There is is no visible stamped design on the outer side of the seal ins...
	Purse	SUSS-3F9013	Post medieval	West Sussex	xml \| csv json
Fragment of a cast copper alloy purse frame. The frame is V shaped in section and has a curved profile. There are two sewing holes. It is broken at both ends and in one end and there is evidence of a third hole. Length is 44.7mm, width 10.5 mm, thickness 2mm. It weighs 7.93grams. Ward Perkins (19...
	Purse	SUSS-3F69C1	Post medieval	West Sussex	xml \| csv json
Fragment of a Medieval to Post Medieval cast copper alloy purse frame, 1475 - 1600 AD. The fragment is part of the side of the purse, with old breaks at both ends. The lower part of the fragment is V shaped in cross-section and has a curved profile. There are two circular holes in one side of the...
	Clothing fastening	SUSS-3F2553	Post medieval	West Sussex	xml \| csv json
A copper-alloy blunt-hooked wire clasp of probable Post Medieval date. The artefact has been made from a single length of wire, bent double to form a simple hook. At the top are two opposing loops, by which the piece would have been sewn to clothing. From here, the hook extends vertically downwar...
	Bell	SUSS-3EDC42	Medieval	West Sussex	xml \| csv json
Copper-alloy bell, an elongated teardrop in shape. At the top is an integral circular loop, made by flattening the pointed end and bending it over to touch the bell. The upper part of the bell is solid, but the lower end consists of a flat triangular sheet which was rolled into shape with a seam...
	Buckle	SUSS-3E8C55	Post medieval	West Sussex	xml \| csv json
Post Medieval cast copper-alloy double-loop buckle frame with a lacquer finish, dating to 1550-1650 AD. Both loops are oval with a rectangular section. In the centre of each loop's outer edge protrudes a round knop with a flat top and worn, moulded rosette. There is moulding on the rest of the lo...
	Coin	SUSS-3DA575	Medieval	West Sussex	xml \| csv json
Venetian Medieval silver soldino of Doge Michael Steno (1400-13); the coin was so thin when cast that there are now holes in it around the inscription. The soldino was known as the galyhalpens (galley-halfpence) as it was brought by the annual Venetian trading fleets. The soldino was about ...
	Book fitting	SUSS-3D4857	Post medieval	West Sussex	xml \| csv json
Post Medieval cast copper alloy catch piece from a two part book clasp of 17th century date. Roughly rectangular in shape with a flaring terminal end, one corner of which is missing to an old break. At the opposite end the plate is stepped outwards slightly and in each corner extends a rectangula...
	Vessel	SUSS-3CEA90	Post medieval	West Sussex	xml \| csv json
Post medieval (later 17th century to 18th century) cast copper alloy vessel leg and foot. The leg is trapezoid in section with a wider front than back and a central raised rib running down the front. It has an old irregular break at the upper end. The leg widens outwards at the base slightly to c...
	Coin	SUSS-3CBB11	Medieval	West Sussex	xml \| csv json
Medieval silver penny of Henry III (1154-1189), Long voided cross Class 3c, minted by Nicole at London, 1249-1250 AD, North 988. The coin has been double struck and moved in the dies between striking so half the reverse legend shows twice and the obverse design is confused.
	Vessel	SUSS-3C83D4	Post medieval	West Sussex	xml \| csv json
Post Medieval cast copper alloy pot foot and part of the leg. The leg is D shaped in section with a flat back; it is broken off just above a transverse collar with an old break. The foot is also D shaped in section with three moulded ribs running down the front and a flat back. The base of the...
	Coin	SUSS-3C3D88	Medieval	West Sussex	xml \| csv json
Medieval silver penny of Richard I (1189-1199), Short cross class 4a, minted by Ricard at London, c.1194-1199 AD, North 968/1.
	Mount	SUSS-3BF7D6	Post medieval	West Sussex	xml \| csv json
Post Medieval cast copper alloy mount dating to c.1500-1700 AD. The mount is flat and geometric in shape with a central large openwork triangle with slightly convex long sides. The top edge has lobed knops at either end and a central loped projection in the centre of the outer side. Below this is...
	Coin	SUSS-3BA763	Post medieval	West Sussex	xml \| csv json
Post Medieval silver halfgroat (twopence) of Charles I (1625-1649), Group G, initial mark sun, 1645-6 AD, North 2260
	Coin	SUSS-3BA653	Medieval	West Sussex	xml \| csv json
Medieval silver penny of Edward I (1272-1307), Class 4a, minted at Canterbury, 1282-1283 AD, North 1023
	Steelyard weight	SUSS-3BA356	Roman	West Sussex	xml \| csv json
Roman bi-conical cast lead steelyard weight with rusted remains of an iron suspension loops at the top and bottom points. The weight is 25.7mm in diameter and 25.1mm long; it weighs 55.02 grams.
	Mount	SUSS-3BA235	Post medieval	West Sussex	xml \| csv json
Post Medieval cast copper alloy mount, 1500-1700 AD. The mount is lozenge shaped with a flat back and front. The front is decorated with a cast, raised design of a flower with central eye within a lozenge shaped line border; around the outer side of the border are a series of pellets and the oute...
	Buckle	SUSS-3B8C36	Medieval	West Sussex	xml \| csv json
Copper-alloy double loop annular buckle with incised transverse grooves on one loop. The other loop has a constyriction on either side, near the strap bar. The area between these is slightly widened and decorated with multiple transverse grooves. both loops are triangular in section with flat bac...
	Coin	HAMP-BD4675	Early medieval	West Sussex	xml \| csv json
A slightly worn and bent late 8th-/early 9th-century silver early-medieval penny of Coenwulf of Mercia (796-821 AD), Later group type struck by Wodel at the East Anglian mint (c. 798 - 821 AD; North 369; Cn. 111). This coin has suffered a small loss to its circumference but otherwise survives ver...
	Coin	SUSS-AD0F44	Post medieval	West Sussex	xml \| csv json
Post Medieval copper alloy farthing of Charles I (1625-1649), Rose Farthing Type 2, initial mark crescent, 1636-1644 AD, North 2291.
	Spoon	SUSS-ACC672	Post medieval	West Sussex	xml \| csv json
The terminal of a spoon stem, cast in copper alloy. It is flat and rectangular in section with a widened three-lobed 'trefid' terminal. The 'trefid' feature gives it a likely date of late-17th century. It has punched initials, I.S. just below the terminal on one side; these have been done using ...
	Bell	SUSS-AC8FF5	Post medieval	West Sussex	xml \| csv json
A complete cast copper-alloy cast spherical bell of Post Medieval date (1600-1650 AD). The bell is spherical and comprises two hemispherical domes with a raised circumferential join. The top hemisphere has 2 circular sound holes and a square suspension loop. The curve of the bell continues under ...
	Scabbard	SUSS-AC27E6	Post medieval	West Sussex	xml \| csv json
A complete cast copper-alloy scabbard chape of late Medieval to Post Medieval (c.1450-1600 AD) date. The cast front has a plain concave back, angled sides and a moulded front. The lower part is shaped like a scallop shell with radiating incised line. At the base of the curve is a projecting bicon...
	Buckle	SUSS-ABD0D5	Post medieval	West Sussex	xml \| csv json
Post medieval cast copper-alloy rectangular shoe buckle with drilled frame for a separate spindle, now missing. The ends are extended into points and there are engraved transverse lines on raised moulding running around the front of the frame. The frame is arched in profile with a dnetral expans...
	Buckle	SUSS-AB3862	Post medieval	West Sussex	xml \| csv json
Post Medieval cast copper-alloy double-loop rectangular buckle frame with missing pin. The frame is plain with a bevelled outer edge. It is 29.9mm long by 20.9mm wide, 2.6mm thick and weighs 4.37 grams. Whitehead (1993, p.75) illustrates a similar buckle, no.461, which he dates to c.1570 to 1700 ...
	Buckle	SUSS-AA1B13	Post medieval	West Sussex	xml \| csv json
Post Medieval cast copper alloy double loop buckle frame missing the pin. The loops are rectangular with outer edges which are widened in the centre into points; their outer edges are bevelled. There are rounded knops on either end of the narrowed strap bar. The frame is 37.9mm long, 20.5mm wide ...
	Buckle	SUSS-A9F5E3	Post medieval	West Sussex	xml \| csv json
Post Medieval cast copper-alloy double-loop buckle frame, dating to 1550-1650 AD. Both loops are oval with a rectangular section. In the centre of each loop's outer edge is a circular expansion. There are traces of moulded decoration both on the loops and the expansions but the details are worn a...