Record ID: SWYOR-C8517C
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
An almost complete Medieval copper alloy harness pendant dating from AD 1100 - 1400. It is circular and bears a rampant lion in moulded relief. The face of the pendant is gilded. There is an incomplete suspension loop, at right angles to the plane of the pendant. Measurements are; length 28.7mm, width 20.7mm, thickness 4.0mm and weight 5.47g. Compare WILT-1ED6E5 for style, but it has a different motif. Griffiths (1986, 1) suggests that horse harness pendants typically date to the 13th and 14th centuries but have been traced back earlier to the 12th century, especially circul…
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C84145
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
An incomplete copper alloy buckle with a D shaped loop of probable late Post Medieval date, AD 1750 - 1950. The frame is D shaped and is circular in cross-section and very uniform. Part of a copper alloy narrow plate with two dome headed copper alloy rivets survives trapped in corrosion and visible through the loop of the frame. The frame and plate are both concreted to a plate of iron under them both. The plainess and cross-section of the frame make a late Post medieval date likely.  Length: 20.65mm Width: 20.57mm Thickness: 7.92mm Weight: 4.35g
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C83D69
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
An incomplete post medieval cast copper-alloy dress fastener; an eye piece form a hook and eye fastener of Read class A, type 8 dating from about AD 1550 - 1700. The fastener is sub-oval in plan with a broken sewing loop at one end and two complete loops at the opposite end, one either side of a protruding rectanglar eye. There is a bifurcated knop on each side of the centre of the plate. There is decoration on the face in the form of a foliate moulded design in the centre surrounded by two oval moulded border lines. The reverse is plain and flat and the surface has…
Created on: Monday 26th February 2024
Last updated: Friday 8th March 2024
Spatial data recorded.

Record ID: SWYOR-C83C82
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
A copper alloy Medieval strap slide dating from AD 1250 - 1400. It is a rounded rectangular frame with a single integral external rivet. Measurements are; length 19.5mm, width 17.2mm, thickness 2.8mm and weight 2.26g. See https://finds.org.uk/counties/findsrecordingguides/strap-slides/#Medievalstrap-slides
Created on: Monday 26th February 2024
Last updated: Friday 8th March 2024
Spatial data recorded.

Record ID: SUR-C83197
Object type: COIN
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A silver medieval short cross cut farthing of Richard I or John dating to c. 1180-1215. Rhuddlan mint, uncertain class or moneyer.
Created on: Monday 26th February 2024
Last updated: Tuesday 27th February 2024
Spatial data recorded.

Record ID: SWYOR-C82EFB
Object type: STRAP END
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
A single plate from a Medieval copper alloy strap end dating from AD 1250 - 1450. The plate is sub-rectangular with one end angled to a point. There is a copper alloy rivet in the pointed end. Scars on the reverse may be from side strips or a forked spacer. Measurements are; length 16.9mm, width 9.2mm, thickness 1.3mm and weight 0.71g. Compare examples in Egan and Pritchard (1991).
Created on: Monday 26th February 2024
Last updated: Friday 8th March 2024
Spatial data recorded.

Record ID: SUR-C81E43
Object type: COIN
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A worn and incomplete silver medieval cut halfpenny of Henry III, Class 5 dating to c.1250-1272. Uncertain moneyer or mint.
Created on: Monday 26th February 2024
Last updated: Tuesday 27th February 2024
Spatial data recorded.

Record ID: SUR-C80BCF
Object type: COIN
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A worn silver medieval cut halfpenny of Henry III, Class 3c-4 dating to c.1248-1250. Uncertain moneyer, Bury St Edmunds mint.
Created on: Monday 26th February 2024
Last updated: Tuesday 27th February 2024
Spatial data recorded.

Record ID: SWYOR-C808A3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
A copper alloy, double looped buckle dating from the Medieval to Post medieval period, about AD 1400 - 1650. It has two D shaped loops with a slight knop at eacha nd of the bar. The frame is angled upwards from the bar.  The outer edges are expanded and the frame is D shaped in cross-section. The copper alloy pin is D sjaped in cross-section and tapers to a sharp point. Compare examples on page 53 of Whitehead (2003). Length: 20.57mm Width: 15.68mm Thickness: 6.04mm Weight: 1.96g
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C8063B
Object type: CLASP
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
A fragment of a copper alloy clasp of Medieval date, AD 1250 - 1450. Only the rotating end of the three part clasp survives, with the bar of the frame encased in the rolled end of the plate. It is a rectangular sheet of copper alloy, rolled tightly round the bar at one end and incomplete at the other. The front of the plate is decorated with short longitidinal incised lines on the rolled part, and two incised crosses saltire flanked by transverse lines of beading on the main plate. The enclosed bar is copper alloy and circular in cross-section. It is 8.9mm long, 12.4mm wide a…
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C7FD38
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
A complete copper-alloy tinned buckle of Post-Medieval date, about AD 1660 - 1720. The buckle is oval with a drilled frame for a separate spindle. The spindle is made of iron and is in sittum but the pin and plate are missing. The upper surface is decorated with moulded oblique grooves. The reverse is flat with bevelled edges on the inner edge. The metal has a dark shiny grey patina and is in fair condition. Measurements are; length 30.9mm, width 30.1mm,thickness 3.9mm and weight 8.08g. A similar example is illustrated in Whitehead, page 97, number 602 and is dated to circa&…
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C7EF30
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
A copper alloy Post Medieval buckle probably dating from AD 1750 - 1900. It would have been D shaped but is distorted from being pulled from both ends. The bar and frame are sub-circular in cross-section. The bar is curved owing to the distortion, and the outer edge is strongly bent. The pin and plate are missing. Measurements are; length 32.4mm, width 27.2mm, thickness 3.2mm and weight 6.33g. The plain design and cross-section suggest a late date for this buckle.
Created on: Monday 26th February 2024
Last updated: Friday 8th March 2024
Spatial data recorded.

Record ID: SUR-C7EBF8
Object type: COIN
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A corroded copper alloy post medieval "Lennox" farthing of James I, dating to 1614-1625. Uncertain initial mark. London mint. Found as part of a group with three rose farthings of Charles I (SUR-C7DF1F).
Created on: Monday 26th February 2024
Last updated: Tuesday 27th February 2024
Spatial data recorded.

Record ID: SWYOR-C7E61E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
A copper alloy Post Medieval double looped buckle probably dating from AD 1600 - 1800. It is sub-rectangular with straight sides and gently curved outer edges with rounded corners. The bar is integral. Both loops angle upwards from the bar and the front face is bevelled. The pin and plate are missing. Measurements are; length 22.8mm, width 18.4mm, thickness 4.1mm and weight 2.38g. There is no close parallel for this very plain buckle in Whitehead (2003), but 330 is similar though larger.
Created on: Monday 26th February 2024
Last updated: Friday 8th March 2024
Spatial data recorded.

Record ID: SUR-C7DF1F
Object type: HOARD
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Three heavily corroded rose farthings of Charles I, dating to 1636-1644, found together. Two are Type 2 with single arched crown, one may be Type 1 with a double arched crown. All have unclear initial marks. As North (1991), number 2290 / 2291. Found as part of a group with a farthing of James I (SUR-C7EBF8).
Created on: Monday 26th February 2024
Last updated: Tuesday 27th February 2024
Spatial data recorded.

Record ID: SWYOR-C7DED7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
A copper alloy, single loop, D shaped buckle and plate from the Medieval period, dating from AD 1200 - 1400. It is of Meols type 1. It is a plain D shaped frame, rectangular in cross-section. The plate is a single strip of metal bent round the bar with a hole for the pin. There is a single copper alloy rivet at the attachment end. The pin is of rectangular cross-section and tapers to a blunt point. The buckle has a brigh blue green patina. Length: 25.88mm Width: 16.65mm Thickness: 6.84mm Weight: 2.19g
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C7D82E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
An incomplete copper alloy Medieval buckle frame and plate dating from about AD 1200 - 1400. The diagnostic outer edge of the frame is missing, but it has a recessed and offset bar and was probably D shaped. The plate is long and rectangular. It is a single sheet of copper alloy folded round the bar. There is a slot for the pin. Only the loop of the copper alloy pin survives. The front plate is decorated with a border of opposed triangle rouletting along each long edge. There is a rivet hole and surviving copper alloy rivet in the middle nearer the buckle end, and another hole at …
Created on: Monday 26th February 2024
Last updated: Friday 8th March 2024
Spatial data recorded.

Record ID: SUR-C7C703
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A cast copper alloy decorative strap mount with a convex lozengiform plate which has a moulded quatrefoil at the centre and a stepped margin around the edge. The reverse is concave with a pair of integrally cast attachment rivets. Circa 17th to early 18th century.
Created on: Monday 26th February 2024
Last updated: Monday 26th February 2024
Spatial data recorded.

Record ID: SWYOR-C7BECF
Object type: BUCKLE
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
An complete copper alloy double looped Medieval asymmetrical buckle dating from AD 1350 to 1450. One of the loops is oval and the other is rectangular in form and smaller.  Both faces of the buckle are flat.  No pin is present and the buckle has a dark grey patina. It is 18.1mm long, 27.6mm wide and 2.2mm thick. It weighs 1.8.g. Compare YORYM-AEFE74. A similar example is illustrated in Whitehead, p.87, number 540 and is dated to about AD 1350 - 1450.
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C7BE59
Object type: VESSEL
Broad period: ROMAN
County: Rotherham
Workflow stage: Awaiting validation
A rim sherd of a ceramic vessel, probably Black Burnished ware of Roman date, AD 43 - 410. It is a rim sherd from a bowl with a dropped flange. The fabric is relatively fine grained, hard and dark grey throughout. It has a very dark grey slip on the exterior surface although the interior has been left plain and coarse. There are sub-rounded to sub-angular translucent quartz inclusions. The flange is dropped below the pointed rim. Measurements are; length 48.6mm, height 31.4mm, thickness 20.1mm and weight 18.20g. The internal rim diameter is about 160mm, estimated from less than 10% o…
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.