Record ID: WREX-03B37E
Object type: BROOCH
Broad period: ROMAN
County: Denbighshire
Workflow stage: Awaiting validation
Fragment of a probable copper alloy Roman plate brooch, inlaid with enamel, dating to the 2nd century AD (100-200AD). The object is oval in plan and slightly convex on the outer face. There is a break at the top and bottom of the object.  This suggests that the object could be a large roundel from the centre of a brooch bow.  It is decorated on the outer face with a series of concentric circular cells, the largest of which contains blue enamel or glass. The inner circles appear to contain degraded enamel or glass, which is a rusty brown colour. The reverse is plain.  …
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Ruthin', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FEF171
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Suffolk
Workflow stage: Awaiting validation
A fragment from a copper-alloy socketed axehead of Bronze Age date. Only the socket end of the axe remains, and it has post-depositional damage. It is broadly trapezoidal in shape, and is hollow. At the socket end the rim in thickened. Along one outer edge is the remains of a longitudinal casting seam.There is a similar example recorded on the PAS database (SF-CA59D7). This socket measures 43.02mm in length, 47.15mm in width, 4.77m in thickness, 47.86g in weight.
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Acton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FEC37E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle plate of Medieval date. 1. Broadly retangular in shape, it tapers to a point, and has two integral lugs, and a circular perforation at one end.  Length: 42.55mm Width:19.59mm  Weight: 6.18g 2. Broadly rectangular in shape,there are two circular perforations Length: 26.59mm Width:21.54mm  Weight: 2.92g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Little Waldingield', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FEA144
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy medieval to post-medieval cast cooking vessel. It is a foot for a cooking vessel, which is rectangular in cross section. Cooking vessel such as this one were in use for a long period, first becoming common during the 13th and 14th centuries, with little change in form well into the post medieval period (Butler and Green 2003, 27). Height: 43.21mm, width: 30.44mm,  weight: 139.98g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Little Waldingield', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FE80DE
Object type: SPINDLE WHORL
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A complete lead spindle whorl of uncertain date. It is plano-convex in shape with a convex upper surface and a flat base. It is sub circular in shape with a central circular hole of internal diameter 8.22mm. It weighs 40.00g and is 23.69mm in diameter. Objects such as these were used for a long period of time for a variety of functions with little change in form.
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Little Waldingield', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FE7879
Object type: SPINDLE WHORL
Broad period: ROMAN
Workflow stage: Awaiting validation
A complete lead spindle whorl of uncertain date. It is plano-convex in shape with a convex upper surface and a flat base. It is sub circular in shape with a central circular hole of internal diameter 7.78mm. It weighs 29.63g and is 26.55mm in diameter. Objects such as these were used for a long period of time for a variety of functions with little change in form.
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
No spatial data available.

• 

  Image not taken

Record ID: SF-FE6D88
Object type: SPINDLE WHORL
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A complete lead spindle whorl of uncertain date. It is plano-convex in shape with a convex upper surface and a flat base. It is sub circular in shape with a central circular hole of internal diameter 7.54mm. It weighs 25.97g and is 23.23mm in diameter. Objects such as these were used for a long period of time for a variety of functions with little change in form.
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Little Waldingield', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FE5E67
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch Colchester derivative. Only the catchplate and part of the lower bow remains, the catchplate is pierced, broadly triangular in plan, with a circular shaped pierced hole. The foot is flat. Length: 27.96mm, Width: 12.35mm, Weight: 2.50g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Acton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FE4CCF
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy Roman Colchester derivative rear hook bow brooch. It is missing the spring, pin, catchplate and part of the foot due to old breaks. The wings are semi-cylindrical in form decorated on their front faces with transverse moulded grooves. At the centre of the head is an integrally cast rear facing hook that would have originally held in place the now missing spring. The bow is triangular in form and section, with flanged sides, tapering to an old break. It is decorated with three central longnitudinal grooves that runs the length of the bow.  It me…
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Acton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FE2286
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete, copper alloy, medieval, casket key, AD.1200-1500. The key has a flat circular loop. The shank is rectangular in plan, oval in section, and is hollow at the terminal. A T-shaped bit extends from the shank. Weight: 3.94g Length: 35.69mm Width: 16.95mm
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Acton', grid reference and parish protected.

Record ID: NLM-FDFE46
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation
Copper alloy finger ring. Cast penannular band, tapering to opposed points opposite the bezel, which comprises a moulded bar with five small pits for inset glass stones [lost]. A moulded V appears at each shoulder. Probably a ‘fairing’ or item of trinket jewellery. Suggested date: Post-Medieval, 1800-1900 Height (as found): 20.2mm, Band Width: 4.8mm, Band Thickness (at bezel): 2.2mm, Weight: 1.75gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-FDF930
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Middle Anglo-Saxon copper-alloy pin with globular head and an integral collared shaft. The shaft is bent once (around 70-80 degrees) and may be complete. It measures approximately 42mm from the collar at base of the head to the tapering but blunt tip. The head is almost entirely covered with punched ring-and-dot impressions. There are four on the upper hemisphere, surrounding a small slightly-flattened area directly on top (opposite the shaft), seven around the middle, and six surrounding the shaft on the underside, none of which are particularly regularly-spaced.  The shaft is …
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FDE189
Object type: FINGER RING
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible finger ring. Cast D-section band, slightly narrowed at one point which, if indeed a finger ring, would be opposite the bezel. The latter, and the rest of the band, is plain. Abraded. The wearing of finger rings was a men’s custom for the Romans, and this band would have to be for a youth or gracile individual if indeed worn on the finger. Suggested date: possibly Roman, 43-410 Diameter (long axis): 19.9mm, Band Width: 4.8mm, Band Thickness: 2.9mm, Weight: 3.08gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FDB9D6
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Nummus of the House of Constantine (306-361), Gloria Exercitus issue of 335-341, Trier mint, possibly issue of 335 from mintmark Obverse description: bust rosette diademed draped and cuirassed right, large eye, seen from front. Obverse inscription: CONSTANT [---] Reverse description: two soldiers with one standard between them, V on vexillum Reverse inscription: GLORI A EX[ERC ITVS] In exergue: TRP. Diameter: 15.7mm, Weight: 1.36gms, die axis: 12
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FD8C61
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Nummus of the House of Constantine (306-361), Gloria Exercitus issue of 330-335, Reece period 17 Obverse description: youthful bust laureate cuirassed right, seen from front. Legend present but undeciphered. Reverse description: two soldiers with two standards between them Reverse inscription: GLOR  [IA EXERC ITVS] Diameter: 15.8mm, Weight: 1.60gms, die axis: 12
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FD7745
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Minim, nummus of the House of Constantine (306-361), probably irregular Gloria Exercitus issue of 335-341, Reece period 17 Obverse description: smooth Reverse description; two soldiers with one standard between them. Reverse inscription: [GLORIA EXERCITVS] Diameter: 10.4mm, Weight: 0.55gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FD6083
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Nummus of the House of Constantine (306-361), Gloria Exercitus issue of 335-341, Reece period 17, possibly Trier mint Obverse description; bust laureate right, draped ?and cuirassed, seen from front. Revers description: two soldiers with one standard between them, circle/annulet on vexillum Reverse inscription: [GLORIA EXERCITVS] In exergue: possibly PTR Diameter: 14.1mm, Weight: 1.13gms, die axis: 12
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: GLO-FD586C
Object type: FINGER RING
Broad period: ROMAN
County: Bath and North East Somerset
Workflow stage: Awaiting validation
Roman silver finger ring fragment of Guiraud type 2b. The ring retains only about 50% of the bezel and one shoulder. The bezel would have originally been oval with a recessed oval cell in the centre that would have mounted a glass or stone but which is now missing. Flanking the stone and running along the edge of both sides is a line of stamped annulars that are confined to the bezel. The shoulder is undecorated and narrows to the hoop which is now truncated. This is an addendum to 2012T279 GLO-E86407 and represents the missing second half of the ring.
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FD4B41
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Radiate indeterminate, later Roman issue of 260-296 Obverse description: radiate head bearded right Reverse description: draped female figure standing facing, oval in left field Diameter: 15mm, Weight: 1.75gms, die axis: 6
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FD30EB
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle. Cast frame, probably sub-rectangular, certainly bevelled behind, possibly double looped having lost a central strap bar of which a tiny stub may remain at one end, and certainly assertively cleaned by the finder. Bent. Suggested date: Post-Medieval, 1600-1800 Length: 25mm, Height: 23mm, Thickness: 1.6mm, Weight: 3.16gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Amcotts', grid reference and parish protected.