Record ID: NLM-F7FB07
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle. Cast pentagonal double looped buckle frame, in the form of a ‘Tudor’ rose with inward-pointing stubs marking the former site of a constricted strap bar. Fiercely abraded; Whitehead (1996 page 47 nos 272- 274) illustrates examples of the type in better condition. Suggested date: Late Medieval to Early Post-Medieval, 1450-1550 Length: 40mm, Height: 37.5mm, Thickness: 2mm, Weight: 7.83gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

Record ID: NLM-E91184
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy probable buckle plate fragment. A trapezoid sheet metal fragment, straight-sided, with a large [diameter 4.5mm] if slightly ragged hole at its broader end, where it is broken. This hole may be the end of a slot or hole for the putative buckle pin and is larger than a rivet-hole. Two rivets of diameter 3mm pass through the plate on either side of this hole. There is a diagonal row of three low bosses at the middle of the plate, raised by stamping from behind. Before this, a rocker-work pattern of two adjacent saltires had been added to its display side. Close-spaced diagona…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

Record ID: NLM-E8BE9D
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Possible buckle plate fragment. A trapezoid fragment of cast copper alloy sheet with faint horizontal lines at its wider end and with an impressed slot at the other narrower end. Folded. A tiny aperture close to the edge at the wider end might be a tiny [diameter 1mm] rivet hole or fortuitous damage. Folded and abraded. Suggested date: Medieval, 1250-1400 Length: 14.5mm, Width/Height: 18.7mm, Thickness (sheet): 1.2mm, Weight: 1.67gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E86B60
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle. A small cast spectacle or double looped buckle frame with expanded outer edges, each with a nick to serve as a pin rest, and with a small knop at either end of a constricted central strap bar . The frame is bent outwards from the strap bar. Suggested date: Post-Medieval, 1500-1650 Length: 23.6mm, Height: 17.9mm, Thickness: 2.1mm, Weight: 2.23gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E705DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible buckle fragment. A part of what is taken to be the cast spacer plate from a buckle of composite construction, retaining the inner edge of a small single loop and a prong – presumably one of a pair. The lack of a hole for the pin might suggest that the spacer has broken across that aperture or may hint that the spacer was part of a strap end rather than a buckle. Suggested date: Late Medieval, 1350-1450 Length: 19.1mm, Width: 8.1mm, Thickness (at loop): 3mm, Weight: 1.47gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E6CC68
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A mall cast copper-alloy Medieval single-loop D-shaped buckle with a slightly expanded front edge with a notched pin rest. The strap bar is narrowed and recessed.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: SUR-E6BAEC
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A cast copper alloy double looped post medieval buckle with rounded sides and small knops at either end of the strap bar. A pointed copper alloy pin is retained.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: SUR-E6A66E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A cast copper alloy double looped post medieval buckle with zoomorphic terminals at either end. From one end projects a simplified bird's head in the form of a trefoil and on the other end there is a flaring triangular bird's tail with a transverse ridge. There are small knops at either end of the strap bar.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: SUSS-E48690
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
An incomplete post medieval copper alloy double loop oval buckle dating between AD 1550-1650 The frame is roughly oval in plan and D-shaped in cross section, with concave long sides with a projecting knop at either end of the pin bar. The outside edges of each loop also expand into a pointed knop, the internal outside edges are also slightly expanded creating a kidney shaped aperture. A loose copper alloy wrap around pin has survived in situ, formed from a copper strip measuring 22.11mm long. One loop has of the buckle has slightly bevelled inside edges, the o…
Created on: Tuesday 16th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: SUR-D1554D
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy double looped buckle of post medieval date. The frame has a rounded edge with small knops at either end of the strap bar, which retains a pointed copper alloy pin.
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: SUR-D14549
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy double looped buckle of post medieval date. The frame has a rounded edge with a notched pin rest and small knops at either end of the strap bar, which retains a pointed copper alloy pin.
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: OXON-955B61
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy late Medieval (c. AD1300-1500) 'disc-on-pin' buckle of Redmayne Type A4, consisting of the 'disc-on-pin' only. The pin comprises a flat sub-lozengiform plate, c. 1.7mm thick, from opposite ends of which project the points. One of the ends of the pin, which has a sharp point, points downwards to meet the frame. The upward-pointing point is less sharp (although this may constitute a break) and curves very slightly to the back. The disc has four in situ globular-headed rivets (each c. 5mm in diameter) at the cardinal points of the obje…
Created on: Friday 12th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: OXON-9188AB
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle of Post-Medieval date, c. AD 1720 - 1790. The buckle is a sub-rectangular knee buckle with a drilled frame to house a separate chape. The frame is rectangular in cross section and has curved corners. The buckle would originally had a chape with a projecting double spiked tongue but this is missing. The metal has a dark grey patina with patches of brown rust where the chape would have been. The buckle is 21.45mm long, 14.68mm wide, 1.53mm thick and weighs 1.05 grams. A similar example is illustrated in Whitehead p.111, no.712…
Created on: Friday 12th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: OXON-9125A7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Fragment of a Post-Medieval buckle dating to the period AD 1720-1790. Three quarters of the buckle frame is missing. The fragment is a section of what would originally have been a drilled frame to hold a separate pin or spindle. The frame fragment is L-shaped in plan, comprising the first section of one rounded corner with about 3/4 of the adjacent long side and a short section of the adjacent short side, and is slightly curved. The frame thickens at the point of the drilled spindle hole, which is filled with corrosion. On the front of the buckle there is the …
Created on: Friday 12th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: NARC-825567
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy buckle of Late Medieval to Post-Medieval date (AD 1500-1650). The object is a spectacle buckle is of a double loop oval form with bevelled edges and a narrowed strap bar. The wire pin is missing. The metal is a mid-green in colour with a slightly pitted patina. Length: 29.00mm, Width: 18.46mm, Thickness: 1.85mm, Weight: 2.2g Whitehead, P 54, No 310.
Created on: Thursday 11th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

Record ID: NARC-801A53
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy Buckle of Post-Medieval date (AD 1620-1680). The object is one loop of a double loop trapezoidal buckle with elaborate moulded decoration consisting of large recurved lobed protrusions either side of projecting lozenge knop. The second loop and wire pin are missing due to old, abraded breaks. Length: 18.94mm, Width: 26.32mm, Thickness: 2.20mm, Weight: 2.3g The metal is green/brown in colour with a slightly pitted patina. Whitehead, P 85, No 536.
Created on: Thursday 11th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

Record ID: NARC-800686
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy Buckle of Post-Medieval date (AD 1620-1680). The object is one loop of a double loop trapezoidal buckle with moulded decoration consisting of trefoil shaped end and lobed protrusions either end of the strap bar. The second loop and wire pin are missing due to old, abraded breaks. Length: 20.53mm, Width: 23.23mm, Thickness: 2.06mm, Weight: 2.5g The metal is green/brown in colour with a slightly pitted patina. Whitehead, P 84, No 523.
Created on: Thursday 11th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

Record ID: SUSS-7F01F1
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
An incomplete post medieval copper alloy double loop oval buckle dating between AD 1550-1650 The frame is roughly oval in plan and D-shaped in cross section, with concave long sides with a projecting knop at either end of the pin bar. The outside edges of each loop also expand into a pointed knop.  A loose copper alloy wrap around pin has survived, (free of the pin bar), measuring 12.03mm long. One loop has of the buckle has slightly bevelled inside edges, as well as a very narrow break in the frame near the pin bar. The buckle is light green in colo…
Created on: Thursday 11th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: OXON-7A50BC
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete Post-Medieval copper alloy buckle dating to c.AD 1660-1720. It is missing half of its frame, is separate strap bar, pin and chape The buckle frame would have been sub-rectangular in plan with rounded narrow edges and a shallow D-shape in cross section with a convex front and flat reverse. although only one half of the frame survives. The break runs along where the axis bar would have been. It is flat in profile. At the point of the break the frame is decorated on each long edge by a triple raised collar. This is placed just before where the frame would have been dri…
Created on: Thursday 11th April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded. This findspot is known as 'Stanton St. John', grid reference and parish protected.

Record ID: NLM-695BC4
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle. Cast sub-rectangular frame of rounded to lentoid section with a rounded slightly expanded and thinned outer edge and a strap bar set back from the frame. A cast and collared pin is looped round the strap bar; its mid-part is crazed and corroded. The frame bears extensive traces of a thick black coating resembling a stove enamel while the pin bears white metal plating. Suggested date: Post-Medieval, 1800-1900 Length: 27.6mm, Height: 21.3mm, Thickness (frame): 3.9mm, Weight: 5.73gms
Created on: Wednesday 10th April 2024
Last updated: Wednesday 10th April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.