Record ID: NARC-120E02
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A heavily worn early postmedieval (c. 16th century) hooked tag cast in copper alloy. The tag is flat in cross section, with openwork, foliate ornament. At one terminal there is a large, rounded hook, of approximately the same length as the decorated body of the tag. The entire tag measures 28.2mm long from tip to tip, is 14.5mm wide at its widest point, and has a maximum thickness of 2.7mm (at the centre of the plate)
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: YORYM-123637
Object type: NAIL
Broad period: UNKNOWN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Lead alloy nail with a rectangular shaft and a round head. There is a small foot at the base of the shaft; this is probably a result of damage. There is a white patina over most of the shaft.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Everingham', grid reference and parish protected.

Record ID: BUC-125E94
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation
A copper alloy horse harness pendant of Medieval date. The pendant is roughly square with a suspension loop extending vertically from the body. The loop remains attached to the suspension mount via an iron pin. The mount is incomplete, having broken or corroded at the point where it's rivet would have been attached. The pendant body has a raised, scalloped boarder which defines a slightly raised central square panel filled with dark blue or black enamel. A central boss extends through this panel to the reverse side of the pendant. Further surface decoration is unclear due to corrosion…
Created on: Thursday 14th June 2007
Last updated: Tuesday 3rd October 2017
Spatial data recorded. This findspot is known as 'Hardmead', grid reference and parish protected.

Record ID: NMS-12ACE0
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Part of Medieval/Post Medieval copper alloy drop handle from vessel, heavily cast oval-sectioned terminal collar in form of stylised lion head, incised and moulded details of eyes, ears and mouth, longitudinally pierced for missing bar, 20 x 15mm. Cf. Egan (1998) fig.143, no.487. 15th–16th century.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Acle', grid reference and parish protected.

Record ID: NMS-12C701
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Incomplete Medieval annular buckle frame, just over half survives, flattened oval section, stylised animal-head, with cusped mouldings (?ears) and engraved triangle on forehead, that projects from edge of frame opposite broken constriction for pin, diameter, 47mm. Cf. Dress Access. (1991), fig.39, no.212, and discussion on p.65. 14th century.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Litcham', grid reference and parish protected.

Record ID: WILT-12C795
Object type: MINIATURE OBJECT
Broad period: BRONZE AGE
County: Wiltshire
Workflow stage: Awaiting validation
Late Bronze Age to Roman copper alloy 'model' (Robinson, Wiltshire Archaeology Magazine 1995) or possibly miniature socketed axehead, with traces of iron in the shallow socket (9.2x5.6x3mm). It measures 38.5mm in length and has a cutting edge max. 24.8mm wide. At the socket end (narrowest part) it is 16.8mm wide. It weighs 31.28g. The axehead is thinnest at the blade end (1.1mm thick) expanding over the length to 12.7mm at the socket end. The mouth has a slight moulding which is emphasised by a groove beneath it. The loop is cast to the side (and not part of the body of the a…
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NARC-13AC14
Object type: VESSEL
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation
A sherd of Roman pottery from a flanged bowl. It has a red, oxidised fabric with a gritty texture, and the core is grey-brown.. The sherd dates to the 3rd or 4th centuries AD. 51.8mm x 36.2mm x14.8mm. Mass 16.6g.
Created on: Thursday 14th June 2007
Last updated: Tuesday 13th July 2021
Spatial data recorded.

Record ID: NARC-13BF37
Object type: VESSEL
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation
A sherd of early Roman samian ware. It has a pink core with the characteristic red slip. Samian ware dates to the 1st century AD. 51.8mm x 36.2mm x14.8mm. Mass 16.6g.
Created on: Thursday 14th June 2007
Last updated: Tuesday 13th July 2021
Spatial data recorded.

Record ID: YORYM-139A27
Object type: LITHIC IMPLEMENT
Broad period: NEOLITHIC
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
A flint thumb nail scraper, dating to the Neolithic period. The edges show signs of retouching.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Everingham', grid reference and parish protected.

Record ID: SOM-14AB84
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A cast copper alloy dress fastener hook-piece of probable seventeenth century date. The fastener measures 36.3mm by 15.8mm by 2.6mm and weighs 3.2g. It has an oval plate with a trapezoidal loop at one end. At the other end there is a small incomplete projecting circular loop and there were originally two further circular loops on each side of the plate adjacent to the trapezoidal hook, although one of these is incomplete. The small holes may have been used for attachment to cloth. The front of the plate has faint moulded floriate decoration and the back in slightly concave.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Misterton', grid reference and parish protected.

Record ID: SOM-14EF77
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A cast copper alloy finger ring of late medieval or post-medieval date. The slightly distorted hoop measures 17.8mm in diameter, it is 5.5mm wide and 1.2mm thick. It weighs 2.4g. The hoop has a rectangular cross-section and its width and thickness are consistent all the way round. On the exterior of the hoop there is a stamped pattern formed from wide and hollowed X-shapes, bordered by narrower X-shapes, alternating with diagonal branches. A similar finger ring features in Bailey's 'Detector Finds 3' (1997, p. 24). This is thought to be late medieval in date, but simple finger rings wi…
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'West Crewkerne', grid reference and parish protected.

Record ID: YORYM-1511B5
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy harness pendant. The plate of the pendant is a sheet of copper alloy, undecorated, with one area bent at a right angle to the back of the sheet. The body probably had a rounded trapezoid plan when whole. The tag for suspension is perpendicular to the body of the pendant. The perforation is full of iron, probably the remains of the chain.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Everingham', grid reference and parish protected.

Record ID: WILT-150C66
Object type: BULLA
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Medieval lead papal bulla of Honorius III, 1216-27. It is 37.8-38.6mm in diameter and 4.3mm thick. It weighs 46.68g. The obverse depicts St Peter and St Paul facing each other within a beaded border, and C and backwards-C beaded border joining to the main surrounds either head. On the left, St Paul has a long, pointed-oval shaped beard below a head with short vertical ribs suggesting swept-back hair (although this is rather worn). St Peter on the right has a short beard with raised dots at the base, and at the top of his head, suggesting curls. The beard is particularly defined around…
Created on: Thursday 14th June 2007
Last updated: Tuesday 18th March 2014
Spatial data recorded.

• 

  Image not taken

Record ID: YORYM-1538F6
Object type: BUTTON
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy button. The object is square in plan, with knops at each quarter and a single raised boss in the centre. The button does not have a shank on the reverse, but rather an integral loop connected directly to the reverse of the body.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Everingham', grid reference and parish protected.

Record ID: YORYM-156BC3
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy strap end of Anglo-Scandinavian design. The zoomorphic terminal is worn, but apparent in the eyes, these being rounded areas in relief, with the surrounding area carved away at a soft angle away from the raised area. There is crescent at the base of the head and two rows of three crescents in the upper part of the strap end. The upper part of the strap end has been broken after the rows of crescents.
Created on: Thursday 14th June 2007
Last updated: Friday 23rd April 2021
Spatial data recorded. This findspot is known as 'Everingham', grid reference and parish protected.

Record ID: LIN-1594E2
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Cast lead cloth seal. The seal is a clothiers personal seal and comprises two flat circular discs connected by an integral stem. The obverse is decorated with lettering reading: - // TO/-S-/-M-. The seal is similar to No 224, Fig 31 in Egan 1994.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Threekingham', grid reference and parish protected.

Record ID: SOM-15BEA3
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A cast copper alloy pendent loop and bar mount of medieval date. The quadrilobate loop and the adjacent mount measure 20.5mm by 11.8mm by 4mm and weigh 1.2g. The plain rectangular bar mount has a narrowed backwards-curving loop at its base. This has an expanded terminal to the rear which is rivetted to the front section, so it could be attached to a strap. The loop upper lobe is straight, so it can be suspended from the bar mount. A similar example is illustrated in Egan and Pritchard's 'Dress Accessories' (1991, pp. 219, 221, no. 1189).
Created on: Thursday 14th June 2007
Last updated: Friday 2nd March 2018
Spatial data recorded. This findspot is known as 'West Crewkerne', grid reference and parish protected.

• 

  Image not taken

Record ID: KENT-15C136
Object type: AXE
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
Neolithic unpolished axehead of light orange-brown flint. An area of cortex remains around the butt end.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: KENT-15DC71
Object type: ARROWHEAD
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
Neolithic leaf-shaped flint arrowhead.
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: WILT-15C678
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Medieval copper alloy horse harness pendant with much of its front surface thickly gilded. There is some slight edge damage just below the loop. In shape it is an elongated drop, the wider end being at the top just below the loop, which is turned through 90°. The point extends into a roundish knop (missing much of its gilding). In section, the harness pendant is D-shaped, being flat to the reverse and rounded to the front. The centre of the pendant, its highest point, is where the little amount of lost gilding is from. The loop is circular and 7.5mm in diameter with a 2mm diamet…
Created on: Thursday 14th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.