• 

  Image not taken

Record ID: NMS-FDF930
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Middle Anglo-Saxon copper-alloy pin with globular head and an integral collared shaft. The shaft is bent once (around 70-80 degrees) and may be complete. It measures approximately 42mm from the collar at base of the head to the tapering but blunt tip. The head is almost entirely covered with punched ring-and-dot impressions. There are four on the upper hemisphere, surrounding a small slightly-flattened area directly on top (opposite the shaft), seven around the middle, and six surrounding the shaft on the underside, none of which are particularly regularly-spaced.  The shaft is …
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NARC-D2CEFB
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy Pin of Early-Medieval date (AD 700-800). The object is composed of a sub-rectangular flat head plate with an integral circular sectioned shaft projecting from the lower edge of the head. The upper edge of the head plate is broken and abraded. There is a raised circumferential collar at the junction between the plate and shaft. The lower end of the shaft tapers to a sharp point. The head plate is decorated with a design in relief composed of am interlace motif with gilding retained within the recessed portions. The back of the head plate is undecorated,…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D16462
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of copper alloy, probably a small piece of foot from an early Anglo-Saxon cruciform brooch. The fragment is C-shaped in cross-section, hollow on the reverse, and is broken at both ends (one break fairly fresh and granular, the other more worn). At one end, the front has a bold moulding, 4-5mm deep and flat-topped, which is divided into two by an off-centre transverse groove. The overall surviving length is 21.1mm, maximum width 12.8mm and maximum thickness (at moulding) 6.0mm. It weighs 4.93g. It seems likely that this is one of the mouldings at the top of a horse's …
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D0E282
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Head and bow from an early Anglo-Saxon copper-alloy small-long brooch. The flat, apparently undecorated headplate has a sub-rectangular central panel with three flat 'knobs', all of which appear to have been mushroom-shaped, or D-shaped above narrowed waists. This shape of headplate is often known as 'trefoil'. On the reverse of the headplate is a broken pin bar lug (worn breaks) with iron staining around it. All the edges of the headplate are worn. The bow is D-shaped in cross-section, quite highly arched and simple, with a groove across the top the onl…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D07466
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Complete early Anglo-Saxon copper-alloy small-long brooch, now in two joining parts. The head is of the 'cross potent' type, with a flat rectangular central panel c. 13 x 18mm. This has three sub-rectangular flat 'knobs' attached by narrower waists, to form a headplate in total 32.2mm wide. The surface is corroded and some is missing, but traces of double-crescent or half ring-and-dot stamps can be seen; there is a row of five on the top knob and a similar row on one side knob, each with a trace of a single groove outside the row of stamps. On the reverse of the headpla…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-CF59E4
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Chunky copper-alloy bar from an early Anglo-Saxon wrist-clasp, apparently of Hines Form B10 or possibly alternatively B4. The bar is cast in one piece, with three cuboidal elements, one in the centre and one at either end. These are linked by D-section areas, each one decorated with two broad U-section transverse grooves or flutes, alternating with three ridges each flanked by narrow grooves. Each of the cuboidal bosses has a substantial white-metal coating, probably of tin. On the flat reverse there are two broken pierced lugs, set transversely and pierced longitudinally. Length 40.3…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-CE5E22
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Early Anglo-Saxon copper-alloy wrist-clasp of Hines's Form B20, in very good condition. It is largely flat, and cast in one piece, with a raised, flat-topped bar, a plate with shaped rear edge, and a complete loop. The bar is c. 6mm wide and has two zones of transverse groove decoration, not perfectly evenly spaced along its length; both consist of a wider U-section groove flanked by two similar slightly narrower grooves. The rear edge of the bar has a longitudinal step intermediate in height between the bar and the rest of the plate. The rear edge of the plate is flatte…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: LEIC-66754A
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
An incomplete early medieval copper alloy Anglo Saxon shield on tongue pin for a single loop D or oval shaped buckle dating to c.AD 450-625. On the outer face, the shield of the pin is smooth, polished and undecorated. It is a waisted oval shape with a rounded semi-circular end then two rounded semi-circular cut-outs opposite each other which flare out below to form two rectangular lobes with a nick in each short projecting edge. The shaft of the pin is curved, tapering gently towards a smooth end and would have originally rested on the external buckle edge. On the reverse of the shie…
Created on: Wednesday 10th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: NLM-52BFC1
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy brooch fragment. The lower part of the bow of a great square-headed brooch, in two joining fragments extending from below a putative mid-bow moulding [lost]. The uppermost part bears opposed sub-triangular lappets occupied by Salin style I decoration with a rectangular panel between them. The top of the rectangular panel is marked by a horizontal rib in relief with close-spaced cuts across it. The sides of the panel bear traces of a border of small crescentic stamps forming a zig-zag line to either side. A horizontally grooved but otherwise plain basal rib completes the re…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Raithby cum Maltby', grid reference and parish protected.

Record ID: SUR-566360
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A complete cast copper alloy early medieval (Anglo Saxon) strap end (cf. Thomas Class A2h). The plate is narrow and oval, waisted to a flared rear end which is characteristically split but incomplete having  broken across the rivet holes on the edge. The front of the plate is decorated with cross hatching or lattice decoration within a linear border. The terminal is zoomorphic, although now too worn for much detail to be visible.
Created on: Thursday 28th March 2024
Last updated: Thursday 28th March 2024
Spatial data recorded.

Record ID: LIN-554D4A
Object type: GIRDLE HANGER
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A fragment from a cast copper-alloy early Anglo-Saxon girdle hanger dating to c.AD 470-560 Only the shank/neck has survived. It is plano-convex with a thickened side terminating with a broken loop. The thickened end (4.6 mm thick) is decorated with cast transverse ribs: two raised bands, followed by a space, then a further two bands. A medial ridge runs the entire length of the extant piece. Below the thickened section the shaft widens gently and is flatter and is D-shaped in cross-section (2.2 mm thick near the break).The shaft terminates with an old break. The reverse is undecorated…
Created on: Thursday 28th March 2024
Last updated: Friday 5th April 2024
Spatial data recorded. This findspot is known as 'Spridlington area', grid reference and parish protected.

Record ID: LIN-2C0C14
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy early medieval (early Anglo-Saxon) small long brooch dating to c.AD 450-550. Penn and Brugmann (2007) Sm2 or Sm3. Only the headplate and part of the bow has survived. The headplate comprises a trefoil head with three projecting sub-rectangular lobes with semi-circular cut aways at each angle. The bow springs from the headplate; it has a D cross-section and is decorated on the convex side with oblique indentations where the bow meets the headplate, creating a trapezoidal block at the upper portion of the bow. A central raised band extends from the block.…
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Greetham with Somersby', grid reference and parish protected.

Record ID: SUR-C20AD1
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An early medieval (Anglo-Saxon) cast copper alloy saucer brooch, dating to c. AD.450-550. The front of the brooch is dished, with an angular and upturned rim around; this is incomplete on one side. The front of the brooch is decorated with a five pointed star pattern formed by double-ridged concave arcs enclosed by an engraved concentric line around a small central boss. There is no trace of gilding. The reverse has an in-line hinge lug and catchplate. There is extensive deposition of iron corrosion products around the hinge lug from a now lost iron spring and pin.
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded.

Record ID: SUR-C1D5DD
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An early medieval (Anglo-Saxon) cast copper alloy disc brooch, 29.2mm in diameter. The face has incised decoration in the form of five dot-in-annulet motifs, one at the centre with four arranged equidistant around it. The reverse has an in-line catchplate and hinge lug, the latter retaining a rusted remnant of an iron spring and pin. Circa 5th-6th century AD.
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded.

Record ID: NLM-AE2229
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy brooch fragment. Cast concavo-convex mid-bow moulding from a cruciform brooch, bubbled and pitted by intense heat, possibly with ridges or stops at one end. Possibly joining with no. 11 above, which it was presented with, but more heavily damaged and so possibly from a different brooch which has suffered a similar fate. Suggested date: Early Medieval, 410-600 Length: 31.9mm, Width: 17.3mm, Thickness: 7mm, Weight: 11.34gms
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded. This findspot is known as 'Scotter', grid reference and parish protected.

Record ID: NLM-ADFCFA
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy brooch fragment. The lower part of a cruciform brooch, from below the mid-bow, which is evidenced by the turned-up end of this fragment.  Below this, incised paired lines limit a plain field with a triple moulded collar below it. This in turn gives way to a possibly human mask with brows and a basal pair of slightly expanded nostrils. It is possible that human and equine masks were combined at this terminal. The stub of an integrally cast catch plate remains behind the upper part of the fragment. The back of the object is slightly concave below the catch plate. The su…
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded. This findspot is known as 'Scotter', grid reference and parish protected.

Record ID: NLM-ADDDFF
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy disc brooch. Cast circular flat plate with a broad central ring and dot of diameter 10.4mm surrounded by indistinct concentric grooves and ribs with an outer textured border; comparable though not identical to NLM-ACDBC8. Paired lugs for a pin [lost] and an opposed stub from a catch plate appear on the back which is otherwise plain. Suggested date: Early Medieval, 500-600 Diameter: 24.1mm, Thickness (clear of pin gear): 1.7mm, Weight: 4.41gms
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded. This findspot is known as 'Scotter', grid reference and parish protected.

Record ID: NLM-ADA3FB
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy and iron mount. Cast copper alloy plate with concentric moulded decoration, of thickness 1.8mm at its outer edge. The decoration comprises, described from the centre outwards: a plain flat central boss, a gutter separating the boss from a thin and possibly cabled strand and continuing beyond it; a thicker cabled band in a gutter with a further narrow strand beyond it; and finally a plain flat border. Gilding traces are trapped in the relief of the decoration. The back bears the corroded stub of a ferrous metal fixing pin. Suggested date: probably Early Medieval, 410-850 D…
Created on: Wednesday 20th March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded. This findspot is known as 'Scotter', grid reference and parish protected.

Record ID: NLM-ACDBC8
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy disc brooch. Cast circular flat plate with an off-centre large ring and dot of diameter 1.8mm with a border of fifteen smaller [diameter 2.5mm] ring and dot at its outer edge. The triangular stub of either a catch plate or pin seat appears on the back. This sort of brooch is infrequently reported in our area, though a Roman version was recently reported from Low Burnham in the Isle of Axholme. Suggested date: Early Medieval, 500-600 Diameter: 25.1mm, Thickness (clear of pin gear): 2.2mm, Weight: 5.54gms
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded. This findspot is known as 'Scotter', grid reference and parish protected.

Record ID: NLM-ACBE4C
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy strap end. Cast elongated oval zoomorphic strap end with a beast head terminal with drilled dots for nostrils and eyes and moulded nostrils, with a bordered panel of  incised vegetal ornament which ends in two short curls beyond which are a pair of rivets of diameter 2.5mm and length 3.1mm with burred ends which pass through the split inner or proximal end of the object; Thomas Class A Type 1 subtype possibly axvi. Suggested date: Early Medieval, 800-850 Length: 37.9mm, Width: 12.9mm, Thickness (overall): 2.3mm, Weight: 4.34gms
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded. This findspot is known as 'Scotter', grid reference and parish protected.

Record ID: NLM-AC5BE1
Object type: GIRDLE HANGER
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy girdle hanger. Cast E-shaped plate with slightly concave outer edges and a longer central stalk, broken at its upper end. A series of semi-circular stamps, each arc enclosing a dot and so resembling halved ring-and-dot, passes along the outer borders of the central stalk, follows the edges of the troughs on either side, and ascends the inner side of the outer elements. The series also runs intermittently on the outer sides of the latter. Extensive traces of white metal plating were observed during image processing. The girdle hanger was part of an object suite associated w…
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded. This findspot is known as 'Scotter', grid reference and parish protected.

Record ID: NARC-AC4E49
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Strap End of Early-Medieval (late Anglo-Saxon) date (AD 1000-1100). Thomas Class E, Type 1 (Winchester Style). The object consists of an openwork, lozenge-shaped plate, with a rectangular upper attachment plate with a single central circular perforation. The plate is composed of Winchester style openwork decoration in the form of a series of symmetrical fronds, emanating from a central stem which twist along the edges of the plate and end in inward curving lobed terminals. The lower rounded end is missing due to an old, abraded, transverse break. …
Created on: Wednesday 20th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded.

Record ID: NLM-1C89C9
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: North East Lincolnshire
Workflow stage: Awaiting validation
Copper alloy brooch fragment. Foot fragment of an Anglo-Saxon cruciform brooch. Suggested date: Early Medieval, 500-600 Length: 46.5mm, Width: 33.4mm, Thickness: 4.1mm, Weight: 13.23gms
Created on: Wednesday 13th March 2024
Last updated: Wednesday 13th March 2024
Spatial data recorded.

Record ID: NLM-1BDA32
Object type: DIE STAMP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible die stamp. Circular moulded die or mount with intertwined bands. Traces of solder on back. Suggested date: Early Medieval, 500-650 Height: 29.5mm, Width: 28.1mm, Thickness: 3.4mm, Weight: 14.49gms
Created on: Wednesday 13th March 2024
Last updated: Wednesday 13th March 2024
Spatial data recorded.

Record ID: ESS-07865A
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Cambridgeshire
Workflow stage: Published
An early medieval silver penny of Harthacnut (1035-1042 AD), 'arm and sceptre' type (North 811; Spink 1169) dating to the period c.AD1040-42, moneyer: Godric, mint: Stamford. Refs: North 1994: p.171; Spink 2016: p. 138.  Measurements: Diameter: 18.3mm; weight: 1.06g.
Created on: Tuesday 12th March 2024
Last updated: Tuesday 19th March 2024
Spatial data recorded.

Record ID: WMID-03EBD6
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A near complete copper alloy strap end of Early Medieval date (c. AD 900-1100), Thomas Class E, Type 1b (Winchester Style). The artefact comprises a tongue shaped plate with a near complete rectangular attachment plate immediately above. Two rivets (left and middle) are still present on the attachment plate, the third is missing, along with the right corner of the plate. The plate is composed of Winchester style decoration in high relief and in the form of a series of elongated tendrils or leaves in an irregular pattern. At the top of the p…
Created on: Tuesday 12th March 2024
Last updated: Tuesday 12th March 2024
Spatial data recorded.

Record ID: WMID-F0CAF1
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete engraved copper alloy penannular brooch, of Early Medieval dating (AD 750 to AD 850). Less than 25% of the brooch is present, with part of the head plate present. The head plate may have been lozenge shaped, with a flat cross section. The decoration is lozenge shaped, with a wide raised ridge creating separate zones. The outer rectangular zones has two strand interlace decoration. The corners are unclear, but may have traces of enamel inlay. The central lozenge section has a zoomorphic stranded design. The reverse is undecorated. It measures 37.3 mm in length, 24.3 mm w…
Created on: Monday 11th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

Record ID: WAW-858677
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
An early medieval silver penny of Offa of Mercia (757-96), Light Coinage, dating c.784-92, moneyer: Winoth, mint: London (North 288). Ref: North 1994: p.86. A very similar coin has been found on the PAS database here: WILT-7FF13B.
Created on: Wednesday 6th March 2024
Last updated: Wednesday 6th March 2024
Spatial data recorded.

Record ID: SUR-1B07F4
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete cast copper alloy early medieval hooked tag dating to c. AD 800 - 1000 and cf. Read's (2008) Class B, type 1. The tag is triangular in shape with two projecting and flanking attachment loops at the rear edge and a sharp hook with an angular collar projecting from the front end. The plate is decorated with concentric compass-inscribed circular ridges around a small annulet centre. 
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: SUSS-CB2699
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
An Early Medieval gilded copper alloy fragment of an unidentified object probably a lappet from an Florid Cruciform (Anglo-Saxon) brooch dating c. AD 480-570. The fragment comprises a worn flat sub-oval plate, one edge is rounded and the other has projecting lobes. The upper surface is decorated with chip carved Salin style I zoomorphic decoration with a scroll and eliptical eye, possibly representing an eagles head. Traces of gilding survive in the recesses. The reverse is plain and undecorated.  Measurements: Length: 18.98mm; width: 13.26mm; thickness …
Created on: Monday 26th February 2024
Last updated: Thursday 29th February 2024
Spatial data recorded.

Record ID: SWYOR-348D21
Object type: VESSEL
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An assemblage of 20 pieces of grey ceramic vessel, some decorated, of Early Medieval date, AD 400 - 700. They may be from cremation urns. They are all body sherds. The fabric is hard, dark grey throughout, with an irregular texture. There are frequent large (about 1-1.5mm), slightly rounded quartz or quartzite inclusions. Some pieces have poorly sorted similar inclusions of varying sizes. Tehe largest decorated piece has stamped marks in rows. The top line is S shaped stamps. Two horizontal grooves separate the next band of decoration which consists of a stamp which is …
Created on: Monday 19th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: PUBLIC-3FC24F
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A complete cast copper-alloy catch-piece from an Anglo-Saxon sleeve clasp, of Hines Form B20 (Hines, 1993: 64-65).  It comprises a rectangular plate/bar with integrally cast decorative plate at the rear edge, part of which is now missing due erosion in the ground. The bar has flat, square terminals at each end with a similar square panel at the centre, each separated from one another by recessed and constricted sections that have moulded transverse decoration, one of three lines, the other of two lines.  At the centre of the front edge is a small projecting re…
Created on: Wednesday 7th February 2024
Last updated: Monday 12th February 2024
Spatial data recorded.

Record ID: NLM-385C00
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy pin head. Shaped like a floating bomb [sic, meaning mine], ball with protrusions, traces of silvering/tinning. Suggested date: Early Medieval, 750-800 Height: 19.9mm, Diameter: 12.3mm, Weight: 10.87gms
Created on: Wednesday 7th February 2024
Last updated: Wednesday 7th February 2024
Spatial data recorded.

Record ID: NLM-3492BC
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Green patinated copper alloy buckle. Narrow Anglo-Saxon buckle with remains of the pin. Suggested date: Early Medieval, 500-600 Length: 10.2mm, Height: 20.6mm, Thickness: 3.1mm, Weight: 1.86gms
Created on: Wednesday 7th February 2024
Last updated: Wednesday 7th February 2024
Spatial data recorded.

Record ID: NLM-3472F6
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy hooked tag. Small hooked tag with two sewing holes and shaped upper edge. Read early medieval Class A Type 1. Suggested date: Early Medieval, 700-850 Length: 16.5mm, Width: 9.6mm, Thickness: 1mm, Weight: 0.29gms
Created on: Wednesday 7th February 2024
Last updated: Thursday 8th February 2024
Spatial data recorded.

Record ID: NLM-341EB6
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy brooch fragment. Foot fragment of an Ango-Saxon cruciform brooch. Suggested date: Early Medieval, 500-600 Length: 46.0mm, Width: 10.6mm, Thickness: 6.2mm, Weight: 8.15gms
Created on: Wednesday 7th February 2024
Last updated: Wednesday 7th February 2024
Spatial data recorded.

Record ID: NLM-33FC82
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy brooch fragment. Bow and foot fragment of an Anglo-Saxon brooch. Stamped decoration. Suggested date: Early Medieval, 500-600 Length: 47.6mm, Width: 11.8mm, Thickness: 3.1mm, Weight: 5.72gms
Created on: Wednesday 7th February 2024
Last updated: Wednesday 7th February 2024
Spatial data recorded.

Record ID: NLM-33DBF6
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy strap end. Narrow moulded strap end. Thomas Class B Type 1. Suggested date: Early Medieval, 800-1000 Length: 38mm, Width: 7.1mm, Thickness: 3.8mm, Weight: 2.56gms
Created on: Wednesday 7th February 2024
Last updated: Thursday 8th February 2024
Spatial data recorded.

Record ID: NLM-33BA79
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Dark green patinated copper alloy pin. Pear shaped head with radial incised lines, collared and hipped. Complete. Flixborough type 133. Suggested date: Early Medieval, 700-850 Length: 30.9mm, Head Diameter: 5.1mm, Shank Diameter: 1.9mm, Weight: 1.42gms
Created on: Wednesday 7th February 2024
Last updated: Thursday 8th February 2024
Spatial data recorded.

Record ID: NLM-338CB9
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Dark green patinated copper alloy pin. Biconical head, flat top, collared and hipped. Complete. Flixborough type 351. Suggested date: Early Medieval, 800-850 Length: 33mm, Head Diameter: 5.3mm, Shank Diameter: 1.7mm, Weight: 1.31gms
Created on: Wednesday 7th February 2024
Last updated: Thursday 8th February 2024
Spatial data recorded.