Record ID: HAMP-129E22
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Medieval cast copper alloy harness pendant. The sub-circular pendant has damaged edges with some breaks. The pendant may have originally been divided into three sections with triangular notches in the edge of the circle. The centre of the pendant has a circular hole for attaching decoration. The circular suspension loop is at a right angle to the pendant. It has a worn surface with a patchy mid-green and brown patina. The pendant is 29.06mm across, 41.76mm long including the suspension loop, 0.96mm thick on the plate and the suspension loop has an external diameter of 6.63mm.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-129275
Object type: JETTON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Extremely worn Nuremburg jetton. The obverse is in extremely poor condition, with the design of three lis and three crowns just visible. The reverse is in better condition, depicting the 'Reichsapfel', a cross on orb, within a double tressure of 3 curves and 3 angles. The legend on both faces is completely worn. The jetton has a mid to light green patina. It has a diameter of 23.45mm and is 0.3mm thick.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-1288E4
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
Roman Coin: Radiate or nummus of unknown emperor. The obverse has an extremely worn right facing bust. The reverse has a left facing standing figure, with fabric across the chest. Due to the levels of ware, the exact reverse type cannot be determined. The legends on both faces are completely worn. The coin is dull red-brown, with large patches of mid green.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-128336
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
Roman Coin: Nummus. The obverse depicts a right facing, diademed or laureate bust. The reverse depicts a standing figure, left arm extended upwards holding a standard or spear. The right arm extends out, however the coin is incomplete, making it unclear if anything is held in the right hand. The reverse type is most similar to Reece 128 ‘emperor facing holding standard and a victory’, dating 350-353AD, or Reece 135 ‘emperor standing with globe and spear’, dating 357-361AD. It is likely that this coin is of the House of Constantine. The legends on both faces are completely worn.…
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-127AC7
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
Roman Coin: Nummus of a 4th century emperor. The obverse depicts a left facing, diademed bust. The reverse type is unknown as it is completely worn. The legends on both faces are worn. The coin has a mid green patina.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-126F66
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Incomplete Post Medieval cast copper alloy double looped buckle. Only one loop survives, which is D shaped. The missing loop would have been sub-rectangular. There is a notched groove at the centre of the outer edge of the loop. The narrow strap bar has a copper alloy double pronged pin folded around it. The pin would have rested on the outer edge of the now missing sub-rectangular loop. The surface of the buckle is worn, and there are worn breaks on the frame. It has a dull brown patina, and the pin is slightly lighter in colour. The surviving section is 23.31mm long, 17.41mm wide and…
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-126A26
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Medieval cast copper alloy buckle. The frame is oval with a straight outer edge. There are three irregularly spaced transverse grooves on the upper surface of the outer edge. The strap bar is narrowed. The frame is extremely worn on one side. It has an even mid green patina. The reverse of the buckle is undecorated.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-1263C2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Medieval cast copper alloy single loop buckle frame. The frame is oval, with an expanded, pointed outer edge, flanked wither side by a knop and transverse grooves. There is a notch at the centre ot the outer edge, which would have acted as a pin rest. The strap bar is offset. The pin is missing. The surface of the buckle is worn and it has an even mid-green patina.
Created on: Tuesday 26th December 2006
Last updated: Monday 13th August 2018
Spatial data recorded.

Record ID: HAMP-125C57
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate. The folded copper alloy sheet has a narrowed looped end to hold the strap bar of the buckle frame, with a central slot for the pin. The plate is recessed to accommodate the buckle frame. There is a worn break just after looped end on one sheet. There is a single central rivet hole at the centre of the plate. The surface is worn and it has an even mid-green patina. It is 42.62mm long, 15.68mm wide and has a maximum thickness of 4.73mm.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-125493
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Post Medieval cast copper alloy double loop oval buckle with lobed knops at two symmetrical points on the loop and at either end of the strap bar. Only one loop survives. The strap bar has the corroded remains of an iron pin adhering to it. The buckle has a dull green patina. The surviving section is 22.32mm long, 18.84mm wide and 2.65mm thick.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-124F62
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Early Medieval cast copper alloy single loop buckle with an integrally cast sub-triangular plate. The loop is oval, with an oval cross-section. There is a small amount of iron corrosion on the plate from the missing pin. The plate has one rivet hole at its terminal end, and three integrally cast rectangular projections on the reverse. These projections would have been perforated to attach to a back plate. The buckle is 24.03mm long, 11.79mm wide and 3.25mm thick. It has a dull dark green patina and is worn.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-124907
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Medieval cast copper alloy single loop folding strap clasp. The loop is sub rectangular, with two curved edges and two parallel straight edges. The folding closure is still attached. The closure is comprised of a copper alloy sheet with with seperate rectangular bar mount held in place with a small copper alloy rivet. The sheet copper alloy plate from the opposite edge of the frame is missing, revealing the narrow strap bar. The buckle has a worn surface and a dull green patina. It is 20.82mm long, 17.64mm wide and 4.4mm thick.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-124366
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Incomplete Post Medieval double loop buckle. The surviving section of the buckle consists of part of both 'D' shaped loops, both having worn breaks at the end. There is a raised rectangular moulding where the two frames meet, located above where the strap bar would have been located. The frame has a mid green patina. The surviving section is 40.30mm long and 23.63mm wide. The frame is 4.23mm wide and 3.66mm thick. The frame is sub-circular in section.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-123CC7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Late Medieval or early Post Medieval cast copper alloy buckle. One loop from a double rectangular looped decorative strap buckle. There is a worn break to each side of the pin bar where the second loop would have been integrally cast. The loop is rectangular in cross section. The upper surface is engraved with double oblique lines. The lower surface is worn with a series of scratches, probably from post depositional activity. The buckle has an even mid green patina, with a small trace of tinning surviving. This buckle dates from circa 1450 to 1600 AD. The surviving section of the buck…
Created on: Tuesday 26th December 2006
Last updated: Wednesday 23rd May 2018
Spatial data recorded.

Record ID: HAMP-123572
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Post Medieval cast copper alloy rectangular double looped buckle. The frame has a bevelled inside edge and is rectangular in cross section. The strap bar is wide. The pin is missing. The frame has a dull green-black patina and the surface is worn, particularly on the reverse. It is 30.20mm long, 38.26mm wide and 3.14mm thick.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-123161
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval single loop rectangular buckle. The frame has a bevelled inside edge, and is sub-rectangular in cross section. There is a worn notch on one edge where the pin would have rested. The pin is completely missing. The buckle has a black-brown patina, and a worn, pitted surface. It is 22.76mm long, 22.99mm wide and 3.02mm thick.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-122AC3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Post Medieval cast copper alloy double loop rectangular buckle. The frame has bevelled inside edges, and a slightly narrowed strap bar. The pin is missing. The frame has a dark black-green patina and a worn surface. It is 24.92mm long, 21.74mm wide and 4.21mm thick.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-1210F7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Incomplete cast copper alloy double loop buckle of Post Medieval date. Only one of the two oval loops is complete, the incomplete frame is bent and has worn breaks at both ends. The frame is sub-rectangular in cross-section, with a curved upper edge. The strap bar is slightly recessed. The pin is missing. The buckle has a dark green-black patina, and a worn, pitted surface. It is 20.64mm long, 22.2mm wide and 2.33mm thick.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-120934
Object type: STRAP END
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Medieval copper alloy double sheet strap end. There is a circular rivet hole at each end of the strap end, one still contains a circular copper alloy rivet. One sheet has a worn break across the empty rivet hole. The strap end is undecorated. It has an even green patina and the surface is worn. It is 31.16mm long, 10.06mm wide and 3.73mm thick.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-1202A4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Medieval cast copper alloy single loop buckle. The outer edge is ornate, with three lobed knops seperated by transverse ridges. The outer knops are more prominant. The strap bar is narrow and off set. The frame has a dull green-black patina and is very worn. It is 12.82mm long, 15.31mm wide and 2.69mm thick.
Created on: Tuesday 26th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.