Record ID: SUR-FCDE61
Object type: MOUNT
Broad period: ROMAN
County: Surrey
Workflow stage: Awaiting validation
A Roman cast copper alloy circular mount or stud in the form of a lion's head facing forward. The stud has the remains of an iron fitting in its hollow back. The front has additional radiating grooves to represent the mane and has three small pits for the eyes and nose. Mounts such as this are frequently found and are thought to have decorated boxes and furniture.
Created on: Tuesday 1st May 2012
Last updated: Tuesday 1st May 2012
Spatial data recorded.

Record ID: LEIC-FB6415
Object type: MOUNT
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Medival? mount in copper alloy. The object is triangular in shape with rounded edges. It has a covex section and is decorated with tapering ridge down the middle which is flanked by three diagonal ridges. The right side of the upper straight edge has a rectangular sectioned bar emerging from it. This bar runs vertically for about 10mm before bending. The left side has a small protrudsion which is semi cirular in shape and section. Next to that is the base of a rectangular sectioned bar, which may have joined up with the other bar. The length of the hook is 22mm and the width is 15mm. …
Created on: Tuesday 1st May 2012
Last updated: Wednesday 2nd May 2012
Spatial data recorded.

Record ID: NLM-EAC377
Object type: MOUNT
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount. Cast six-pointed star, slightly concavo-convex at its centre. The 'points' of the star are actually curvilinear, each resembling a bell or petal with a knop at its narrow end. A ragged central sub-rectangular hole of length 6.4mm appears to indicate where the object was fastened, and roughly removed. Suggested date: Post-Medieval, 1600-1800. Length: 30.7mm, Width: 27.1mm, Thickness: 1.2mm, Weight: 4.01gms.
Created on: Monday 30th April 2012
Last updated: Tuesday 19th January 2021
Spatial data recorded.

• 

  Image not taken

Record ID: HESH-E8CE71
Object type: MOUNT
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An irregular section of cast copper alloy mount, most probably the decorative tip of a strap plate from a box or piece of furniture dated to the later medieval period (1200-1500 AD). The plate is broadly sub-rectangular with a lis-shaped terminal ; in cross section the plate is D shaped. The long edges are bevelled and taper and expand along their length, The terminal is eroded but is broadly a lis shape. Through the centre of the lis is the remains of an iron rivet / pin. The lower section of the mount is distorted and the broken edge is curved slightly, possibly by design or by mov…
Created on: Monday 30th April 2012
Last updated: Wednesday 2nd May 2012
Spatial data recorded. This findspot is known as 'Inkberrow', grid reference and parish protected.

Record ID: PUBLIC-D4FCA4
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Published
A complete post-medieval copper alloy enamelled mount for a leather strap or harness. The front of the mount has a domed surface with a near-flawless yellow enamel background which sits in the recesses of the decoration. A five-petalled flower is centrally placed on the top of the convex mount. It is surrounded by an inner circle of foliage made up of five simple curls and five leaves spaced alternately, all curving inwards towards the centre from a concentric ridge. This is then finished with an outer ring of dashed lines within an outer ridged border. The reverse of the mount is …
Created on: Sunday 29th April 2012
Last updated: Friday 8th September 2017
Spatial data recorded. This findspot is known as 'BUCKDEN', grid reference and parish protected.

Record ID: KENT-AADCF6
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A complete post-medieval cast copper alloy mount. It is rectangular and has bevelled edges but is otherwise undecorated. The reverse shows signs of iron corrosion products around the rivets, which may also be seen at the front. The object is in fair condition with corrosion products on both the front and reverse sides. The mount is 13.64 mm long, 32.06 mm wide, 2.8 mm thick and weighs 8.58 g.
Created on: Friday 27th April 2012
Last updated: Thursday 3rd May 2012
Spatial data recorded. This findspot is known as 'Thanet', grid reference and parish protected.

Record ID: KENT-A9DCA1
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A complete post- medieval cast copper-alloy mount. It is circular and covex in profile. The surface is textured and unknown if it was deliberate or an effect of the burial environment. The reverse retains one curved, perforated rivet. It is in fair condition and has corrosion products covering most of the surface, but all parts appear to be intact. It is 25.5 mm in diameter, 2.27 mm thick and weighs 8.02 g.
Created on: Friday 27th April 2012
Last updated: Wednesday 16th May 2012
Spatial data recorded. This findspot is known as 'Thanet', grid reference and parish protected.

Record ID: KENT-A98B84
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
An incomplete post-medieval cast copper-alloy mount or harness fitting. The mount is sub-rectangular in shape with all four corners replaced with concave edges. The edges of the mount are bevelled. The front surface is smooth and undecorated. The reverse is recessed and retains part of each rivet, although these appear broken. It is in fair condition and has some surface corrosion products. It is believed to date from circa 1600-1800. The mount is 18.64 mm long, 24.65 mm wide, 2.53 thick and weighs 6.61 g.
Created on: Friday 27th April 2012
Last updated: Wednesday 27th June 2012
Spatial data recorded. This findspot is known as 'Thanet', grid reference and parish protected.

Record ID: KENT-A95571
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
An incomplete post-medieval cast copper alloy mount. It is oval in shape and convex in profile. The front is undecorated although there are many scratches, and the reverse retains 4 rivets. 2 of the rivets have been worn down, and the other 2 are folded over. The mount is in good condition with very little surface corrosion present. It is believed to date from circa 1600-1800. A similar mount may be found on the database NLM-244C14. This mount is 40 mm long, 50.98 mm wide, 3.05 mm thick and weighs 29.21 g.
Created on: Friday 27th April 2012
Last updated: Wednesday 16th May 2012
Spatial data recorded.

Record ID: KENT-A8EE91
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A complete post-medieval cast copper-alloy mount or harness fixture. It is sub-rectangular in shape. One end has a straight edge and has been angled at about 45 degrees from the rest of the mount and is also slightly wider. The sides are cocave, and end in two rounded projetions. The mount appears undecorated and may have iron surface corrosion. The reverse has a loop for attachment. The condition is good with limited surface corrosion. It is thought to be post-medieval in date. This mount is 26.87 mm long, 22.52 mm wide, 1.64 mm thick and weighs 7 g.
Created on: Friday 27th April 2012
Last updated: Wednesday 27th June 2012
Spatial data recorded. This findspot is known as 'Margate', grid reference and parish protected.

Record ID: KENT-A896D4
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
An incomplete post-medieval cast copper alloy mount. It is sub oval in shape with 4 raised vertical lines parallel to the sides, 2 on each side. In the centre is a raised circular protrusion. The reverse retains small portions of 5 rivets. The mount is in fair condition and is covered over most of the surface with corrosion products. The edges also appear to have been damaged. This mount is dated to circa 1600-1800. The mount is 38.16 mm long, 49.9 mm wide, 3.97 mm thick and weighs 24.62 g.
Created on: Friday 27th April 2012
Last updated: Wednesday 16th May 2012
Spatial data recorded. This findspot is known as 'Thanet', grid reference and parish protected.

Record ID: KENT-A821D1
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
An incomplete post-medieval cast copper alloy mount. It is circular, convex in profile and is otherwise undecorated. The reverse appears to have been subjected to more weathering and is more corroded than the front. There are remnants of the rivets but have been worn down almost completely. The mount also was in contact with an iron object during deposition and retains iron corrosion products at the front. It is likely to date from the 17-18th centuries. Similar examples may be found on the databse SOM-02CD00 and LON-8E50A6. This mount is 26.6 mm in diameter, 7.39 mm in height and w…
Created on: Friday 27th April 2012
Last updated: Tuesday 8th May 2012
Spatial data recorded.

Record ID: KENT-96BE48
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A complete cast lead alloy post medieval circular mount. It is undedcorated, convex in profile and still retains the mount at the reverse. It is in fair condition althought the suface is covered in corrsoion products. The mount has a diameter of 24.1 mm, a height of 9.39 mm and weighs 5.95 g.
Created on: Thursday 26th April 2012
Last updated: Wednesday 27th June 2012
Spatial data recorded. This findspot is known as 'Thanet', grid reference and parish protected.

Record ID: LIN-9629C4
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper-alloy object, possibly a drawer knob from a piece of furniture. The object has a solid globular head decorated with an incised band around the perimeter. A waisted shank extends which flares to a flat base. An incomplete circular-sectioned shank extends from the centre of this base. Probably post-medieval in date, though it was found on a field that produces large amounts of Roman material.
Created on: Thursday 26th April 2012
Last updated: Tuesday 1st May 2012
Spatial data recorded. This findspot is known as 'near Sleaford', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-927BB3
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A corroded, cast copper-alloy mount or eyelet of Medieval date. It is flat, disct shaped in form with a large central circular aperture. To either side of the aperture are single circular rivet holes. The front face of the mount has incised decoration comprising zig-zag or diagonal grooves radiating around the central aperture, possibly forming a star-shaped motif, but this is uncertain due to the preservation of the object. Traces of a very worn added white metal coating or gilding are visible. It measures 19.04mm in diameter, 1.78mm in thickness and 1.60g in weight. This is a Mediev…
Created on: Thursday 26th April 2012
Last updated: Thursday 26th April 2012
Spatial data recorded. This findspot is known as 'Eriswell', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-9263B5
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A sheet copper-alloy mount of Medieval date. It is circular in form with slightly concave back face and central circular rivet hole. The front face has moulded decoration formed from three concentric rings surrounding the central aperture, the middle one of which is beaded. The entire object measures 22.38mm in diameter, 3.25mm in thickness/height, and 1.11g in weight. This is a disc shaped mount of Medieval date similar to examples from London (Egan and Pricthard, 1991: nos. 927-929). It is of 14th century AD date.
Created on: Thursday 26th April 2012
Last updated: Thursday 26th April 2012
Spatial data recorded. This findspot is known as 'Eriswell', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-924D81
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy bar mount of Medieval date. It has a circular, dome-shaped plate with incised decoration on the front face formed from transverse grooves with notched decoration. At each end of the plate are integrally cast semi-circular lugs that are slightly dome-shaped in section and have central circular rivet holes containing separately cast copper-alloy rivets with flattened round heads. The entire object measures 16.97mm in length, 9.66m in width, 3.26mm in thickness and 1.14g in weight. This is a decorative bar mount of Medieval date similar to examples published from Lond…
Created on: Thursday 26th April 2012
Last updated: Thursday 26th April 2012
Spatial data recorded. This findspot is known as 'Eriswell', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-923AD4
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy bar mount of Medieval date. It has a circular, dome-shaped plate with incised cross-hatched decoration on the front face. At each end of the plate are integrally cast semi-circular lugs that are slightly dome-shaped in section and have central circular rivet holes containing separately cast copper-alloy rivets with flattened round heads. The entire object measures 16.45mm in length, 8.80m in width, 3.11mm in thickness and 1.33g in weight. This is a decorative bar mount of Medieva date similar to examples published from London (Egan and Pritchard, 1991: nos. 1160-11…
Created on: Thursday 26th April 2012
Last updated: Thursday 26th April 2012
Spatial data recorded. This findspot is known as 'Eriswell', grid reference and parish protected.

Record ID: WMID-922F22
Object type: MOUNT
Broad period: MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
An incomplete copper-alloy bar mount of probable medieval date. The mount is likely to have been a fitting from either a box or a book. The mount is 'T' shaped in plan, with a double loop at the complete end, presumably rivet holes for attachment. The other end is broken. The mount is decorated with a symmetrical moulded design incorporating mirrored fleur-de-lis with lozenges in between. The surface patina of most of the mount is missing and it has a purple brown appearance, although fine traces of a possible gilded surface remain. Length 49.9 mm, width 18.6 mm, weight 1.0 gram.
Created on: Thursday 26th April 2012
Last updated: Saturday 23rd February 2013
Spatial data recorded.

Record ID: LIN-919D84
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy early medieval quaterfoil mount. The mount is decorated with four abstract faceted animal heads. At the top of each head there is a rivet hole, a rivet is preserved in two of them. The mount is domed on the front and slightly curved on the reverse.
Created on: Thursday 26th April 2012
Last updated: Thursday 10th May 2012
No spatial data available.