Search results

Back to simple search | Back to advanced search

Map results Login or register so you can export data

    You searched for:

    • Createdby: 3154
    • Created after: Sunday 1st January 2012
    • Created before: Sunday 15th April 2012
    • Institution: PUBLIC
    • Broad period: EARLY MEDIEVAL
  • Thumbnail image of PUBLIC-492F13

Record ID: PUBLIC-492F13
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find waiting to be validated
A cast copper alloy fragment of an object, possibly an Early Medieval Anglo-Saxon small long brooch, c. 6th century AD. The fragment is in very poor condition, therefore a positive identification is impossible. However, the small portion that remains suggests that it comprised a portion of the square brooch head, lightly curved neck and body. The cross-section at the 'head' is relatively flat, whereas the faceting on the body suggests a sub-triangular cross-section. No traces of the pin mechanism survive. The colour of the fragment ranges from a mottled mid-green to reddish brown…
Created on: Thursday 29th March 2012
Last updated: Monday 13th August 2012
Spatial data recorded. This findspot is known as 'Near Lewes', grid reference and parish protected.

  • Thumbnail image of PUBLIC-37ABA5

Record ID: PUBLIC-37ABA5
Object type: HARNESS FITTING
Broad period: EARLY MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find waiting to be validated
An incomplete Early Medieval copper alloy terminal from a bridle link or cheek piece. The terminal is comprised of a sub-oval loop with three knops projecting from the outside edge. One of the knops is opposite where the broken attachment joins the oval terminal loop and the other two are diametrically opposed at 90 degrees to this. The front edges are rounded and the reverse is flat. Similar strap links are shown in Williams, Anglo-Scandanavian Horse Harness Fittings, The Finds Research Group AD 700-1700, Datasheet 39, p5. It is dated to the 11th or 12th century. It weighs 7.5 grams…
Created on: Wednesday 28th March 2012
Last updated: Monday 13th August 2012
Spatial data recorded. This findspot is known as 'Near Lewes', grid reference and parish protected.

  • Thumbnail image of PUBLIC-8F2370

Record ID: PUBLIC-8F2370
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find waiting to be validated
A complete Early-Medieval copper alloy stirrup strap-mount c 1000 - 1100 AD. The mount is diamond shaped with an openwork design of four smaller diamonds created by a diagonal cross on a flat base. At the opposite end from the base is the rounded apex loop which measures 11.7 mm across with a central hole which contains the remains of an iron rivet. The mount is decorated with seven circular pellets, one at the centre of the cross, two below the suspension loop, one at each outer corner of the mount and two towards the base of the mount, which are aligned with those below the suspensi…
Created on: Tuesday 20th March 2012
Last updated: Wednesday 22nd May 2013
Spatial data recorded. This findspot is known as 'Duncton', grid reference and parish protected.

  • Thumbnail image of PUBLIC-0AC956

Record ID: PUBLIC-0AC956
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find waiting to be validated
An incomplete, cast, copper-alloy zoomorphic, probable stirrup terminal of Early Medieval date. The object is sub-rectangular in plan and U-shaped in section with a concave back face and moulded, convex front face. The front face has a moulded, zoomorphic decoration in relief comprising a triangular, design, possibly representing an animal's snout. The object is broken across the widest part of this design and across, what appear to be, two, circular holes. The object is also broken across below the pointed area of the design. The reverse of the object is undecorated but has a raised,…
Created on: Friday 2nd March 2012
Last updated: Monday 3rd September 2012
Spatial data recorded. This findspot is known as 'Fulstow', grid reference and parish protected.

  • Thumbnail image of PUBLIC-922077

Record ID: PUBLIC-922077
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation Find waiting to be validated
The upper part of a cast copper alloy early medieval cruciform brooch with the remains of an iron spring. The brooch has a plain head plate with three rounded knobs springing from grooved collars. Along the front spine of the bow is a wide band which is decorated with two lines of punch marks. The back is plain and has the rusted remains of an iron pin. This fragment measures 41mm wide and is 28mm in length.
Created on: Monday 13th February 2012
Last updated: Wednesday 4th April 2012
Spatial data recorded. This findspot is known as 'St Ippolyts', grid reference and parish protected.

  • Thumbnail image of PUBLIC-8D1F71

Record ID: PUBLIC-8D1F71
Object type: STYLUS
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find waiting to be validated
A copper-alloy stylus of Early Medieval or Medieval date. The shaft of the stylus is oval in section and has been broken approximately 36mm from the point. The upper part is missing. From the break, the shaft flares out and widens slightly. It then steps sharply in where the integrally-cast, circular-section point projects from the centre of the base. The point is 7.8mm long. Just above the step, on the shaft, two, diagonal, parallel lines are incised. They do not go right around the shaft, only approximately one third of the way around.
Created on: Monday 13th February 2012
Last updated: Monday 27th February 2012
Spatial data recorded. This findspot is known as 'Skidbrooke', grid reference and parish protected.

  • Thumbnail image of PUBLIC-9688E0

Record ID: PUBLIC-9688E0
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find waiting to be validated
A late Saxon, cast, copper-alloy disc brooch with backward-looking beast within a border of 28 pellets (this is the most frequently recorded number of pellets on a brooch of this type). The beast has an upturned tail and open jaws. It has no mane as many other brooches of this type do. There is a ring-and-dot eye, a single ring-and-dot on the beast's breast and one on it's haunches. The beast has four legs, with two or three toes on each which blend into the border pellets. On the reverse are the integrally-moulded pin-lug and catch-plate. The pin-lug is positioned directly behind the …
Created on: Wednesday 1st February 2012
Last updated: Wednesday 16th April 2014
Spatial data recorded. This findspot is known as 'South Somercotes', grid reference and parish protected.

  • Thumbnail image of PUBLIC-32BBB8

Record ID: PUBLIC-32BBB8
Object type: GAMING PIECE
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find waiting to be validated
Lead gaming counter o possible Early Medieval, Anglo-Scandinavian date. The object is conical shaped with 6 raised pimples on the top arranged 5 on the outside and 1 in the middle. Completely flat base. Similar gaming pieces can be seen on the database, SWYOR-21BDC3, DENO-646EE0, NCL-FC8D35 and NCL-CFFFC7; all of which are dated to the Early Medeival period.
Created on: Sunday 15th January 2012
Last updated: Monday 6th February 2012
Spatial data recorded. This findspot is known as 'Taylors Lane', grid reference and parish protected.

  • Thumbnail image of PUBLIC-E906F4

Record ID: PUBLIC-E906F4
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Cambridgeshire
Workflow stage: Published Find validated and published by finds advisers
An incomplete, cast copper-alloy pin, probably dating to the Middle Anglo-Saxon period (AD 720 to 900). The pin has a biconical or globular head and is undecorated. There is a small circumferential collar which measures 2.3mm in diameter at the junction between head and stem . The incomplete stem is circular in cross section and is slightly bent. The break has occurred in antiquity. Existing metal work is in good condition, and measures 21.7mm in length, diameter of head 7.9mm, and weight 2.5g.
Created on: Thursday 12th January 2012
Last updated: Monday 25th June 2012
Spatial data recorded. This findspot is known as 'SOUTH CAMBRIDGESHIRE', grid reference and parish protected.

Records per page: 10 20 40 100

Only results with images: on off

Sort your search by:

Which direction? descending | ascending

Total results available: 9
Server farm key: beowulf

You are viewing records: 1 - 9.

Search statistics

  • Total quantity: 9
  • Mean quantity: 1.000
  • Standard deviation: 0.000
  • Maximum quantity (one record): 1
  • Minimum quantity (one record): 1
  • Sum of squares: 9

Filter or refine your search

1 - 9 of 9 records.

This page is available in: json xml rdf rss atom kml geojson qrcode midas representations.

Social Bookmarking: