Search results
You searched for:
Your search returned 3473 results. You are viewing 871 - 900.
| Image | Object Type | Find number | Broadperiod | County | Actions |
|---|---|---|---|---|---|
|
Brooch | SF8702 |
Early medieval | Suffolk |
xml | csv json |
| Most of foot and stub of bow from a square-headed brooch of Hines's Group XIX. Too little of the bow survives to be certain as to its form or decoration; the break here seems slightly more recent than the breaks elsewhere. The footplate upper borders are extended into lappets, one long and roun... | |||||
|
Buckle | SF8701 |
Early medieval | Suffolk |
xml | csv json |
| Small oval copper-alloy buckle frame, 20 mm wide and 10 mm long. The bar is narrowed with sharp steps to either end, but not offset. In the centre of the bar is a low step suggesting wear from the hinge loops of a plate. The rest of the frame is circular in cross-section, swelling very slightl... | |||||
| Coin | SF8700 |
Medieval | Suffolk |
xml | csv json |
|
|
Harness fitting | SF8699 |
Iron age | Suffolk |
xml | csv json |
| Copper-alloy mini-terret, very corroded but complete. The hoop is circular or oval in cross-section, tapering from oval stops, the least corroded of which measures 9 x 8 mm. The bar is rectangular in section and 6 mm long. There is no decoration surviving. | |||||
| Coin | SF8698 |
Roman | Suffolk |
xml | csv json |
|
|
Vessel | SF8686 |
Iron age | Suffolk |
xml | csv json |
| Small copper-alloy vessel mount in the shape of a stylised bull's head. The neck is long and curving, and broken at the lower end (fresh break). It flares slightly from the break and has a flaring groove running up the reverse, which forms an indentation on the top of the head. To either side ... | |||||
|
Pin | SF8685 |
Early medieval | Suffolk |
xml | csv json |
| Copper-alloy pinhead and part of shaft. The pinhead is an irregular cube of side 6 mm; the faces are not at right angles and the corners are cut off. There is no decoration on any face. Below the head is a collar, and then a tiny fragment of circular-section shaft. The break is fairly fresh. ... | |||||
| Metal working debris | SF8684 |
Suffolk |
xml | csv json |
||
| Two pieces of copper-alloy metal-working debris, a casting jet and a solidified molten flat piece, probably a spill. The casting jet has a single spike which is a pointed oval in cross-section. | |||||
| Vessel | SF8683 |
Medieval | Suffolk |
xml | csv json |
|
| Late Medieval and Transitional Ware sherd, 15th to 16th century. | |||||
| Vessel | SF8682 |
Medieval | Suffolk |
xml | csv json |
|
| Two handle fragments of Essex Red Ware, 13th to 14th century. | |||||
| Vessel | SF8681 |
Medieval | Suffolk |
xml | csv json |
|
| Four body sherds of medieval coarse ware, 12th to 14th century. | |||||
|
Button and loop fastener | SF8680 |
Roman | Essex |
xml | csv json |
| Copper-alloy button-and-loop fastener of Wild's type Vib (fasteners with plain (i.e. unenamelled) rectangular heads). Although the head was probably originally rectangular, it has now lost most if not all of its edges, and is now sub-rectangular or sub-oval and measures 25 x 16 mm x 3 mm thick. ... | |||||
|
Arrowhead | SF8679 |
Post medieval | Essex |
xml | csv json |
| Long slim copper-alloy arrowhead. The head is leaf-shaped and hand-forged, with a stepped cross-section; when held with the point to the top, the left-hand side of the blade is depressed. The head measures 12 mm wide and 38 mm long; the rest of the 163 mm long object is taken up with a slim tap... | |||||
|
Vessel | SF8707 |
Early medieval | Suffolk |
xml | csv json |
| Sherd of stamp-decorated Ipswich ware, from a spouted pitcher; a stub of the spout survives. There are two stamps on the sherd. One is a long chevron, 12 mm wide and 22 mm long, with three longitudinal lines and three horizontal lines forming a lattice. One complete stamp of this shape and par... | |||||
|
Vessel | SF8706 |
Early medieval | Suffolk |
xml | csv json |
| Rim sherd from a small biconical bowl. Hand-made, and decorated with a band of incised decoration above the shoulder. The surviving fragment of decoration consists of a horizontal line at the top, then four oblique lines running one way and four the other to form a V shape. Early Anglo-Saxon, ... | |||||
|
Token | SF8721 |
Medieval | Cambridgeshire |
xml | csv json |
|
Strap fitting | SF8720 |
Medieval | Cambridgeshire |
xml | csv json |
| Part of the spacer plate from a composite strap-end. The fragment is a crescent of copper-alloy and there is an acorn-shaped knop at the centre. The knop is fairly flat, but has cross-hatched decoration on both sides of the acorn's cup. The fragment is now bent a little out of shape; there is n... | |||||
|
Vessel | SF8719 |
Medieval | Cambridgeshire |
xml | csv json |
| Cast copper-alloy tubular spout in the form of a dog's head. It was cast separately from the rest of the vessel and soldered on via a long sloping seam. The spout quickly tapers to become tubular; the end has a pair of upright rectangular slightly fluted ears, a moulded brow and muzzle with no e... | |||||
|
Buckle | SF8718 |
Medieval | Cambridgeshire |
xml | csv json |
| Copper-alloy buckle frame, oval with an offset (but not narrowed) bar. The outer edge is flattish and angled but is not decorated. Width 20 mm, length 13 mm. Medieval, probably 13th century. | |||||
|
Buckle | SF8717 |
Medieval | Cambridgeshire |
xml | csv json |
| Copper-alloy buckle frame, a distorted oval shape and apparently made, rather than later bent into, this odd shape. The bar is narrowed and offset; at one end the loop then has a high, narrow curve and at the other end a shallower, wider curve. The outer edge then swells to the pin rest, where t... | |||||
|
Sword | SF8716 |
Bronze age | Suffolk |
xml | csv json |
| Short fragment of copper-alloy blade, probably from near the tip end of a sword. The cross-section is lentoid with slightly concave sharpening bevels near the edge. The main breaks are patinated and slightly worn, so appear to be ancient. The patina is a medium green/brown with patches of pale... | |||||
|
Harness fitting | SF8715 |
Roman | Suffolk |
xml | csv json |
| Copper-alloy covered-loop terret, with the remains of an iron loop. At the top is a ring, externally 22 mm diameter and internally 13 mm diameter. A short neck decorated with a horizontal groove separates this from the 'skirt' which covers the loop. This consists of two short lateral pointed p... | |||||
|
Dress fastener (dress) | SF8714 |
Post medieval | Suffolk |
xml | csv json |
| Possible dress fastener or strap fitting consisting of three elements, all made from copper alloy. The first is a strap-end, now slightly bent; it measures 14 mm wide and 44 mm long. The front and sides of the strap-end are made in one piece of sheet, and the backplate is separate. They are jo... | |||||
|
Harness pendant | SF8713 |
Medieval | Suffolk |
xml | csv json |
| Nicely made gilded copper-alloy horse-harness pendant in the shape of a shell. Below the loop, a wide collar runs around three sides leaving the reverse flat. Below this is the convex shell with scalloped edge, decorated with grooves radiating from the collar which are crossed by three pairs of... | |||||
| Coin | SF8712 |
Medieval | Suffolk |
xml | csv json |
|
|
Strap fitting | SF8711 |
Medieval | Suffolk |
xml | csv json |
| Possible fragment of strap-end; a single sheet of copper alloy 27.5 mm long, which tapers from a maximum of 12 mm wide at one end, and has an incurved cut-out in the centre of each long side. The narrower end has some sort of projection, perhaps now broken. One face has some iron staining at th... | |||||
| Coin weight | SF8710 |
Medieval | Suffolk |
xml | csv json |
|
|
Hooked tag | SF8709 |
Post medieval | Suffolk |
xml | csv json |
| Large hooked tag made from copper alloy. The plate is an openwork trefoil cast to resemble a single strand of beaded wire curving and twisting to form three loops. Above are two pellets and a straight bar forming an attachment loop, and below is a D-shaped section projection which tapers and be... | |||||
|
Buckle | SF8708 |
Medieval | Suffolk |
xml | csv json |
| Oval buckle frame made from copper alloy, 28 mm wide and 19 mm long. The bar is offset and narrowed and the outer edge is circular in cross-section, swelling to a maximum of 3.5 mm in diameter. There is a slight blackish discolouration in the centre of the bar, probably from the missing pin. | |||||
|
Harness mount | SF8754 |
Medieval | Suffolk |
xml | csv json |
| Large chunky copper-alloy mount, probably from horse-harness. In the centre is a large convex circular lobe, 20 mm in diameter, with a large square-section integral rivet in the middle of the reverse. All around are smaller similar lobes; originally there were eight, but now only five survive, a... | |||||
871 - 900 of 3473 records.
Social Bookmarking: 
