Search results
You searched for:
Your search returned 3473 results. You are viewing 781 - 810.
| Image | Object Type | Find number | Broadperiod | County | Actions |
|---|---|---|---|---|---|
|
Vessel | SF8499 |
Medieval | Suffolk |
xml | csv json |
| Cast copper-alloy leg from a vessel. It is rectangular in section, 23 x 10 mm at the fragmentary hollow top tapering to 16 x 7.5 at the angle with the foot. The foot turns an angle of less than ninety degrees and then is squared off. | |||||
|
Vessel | SF8498 |
Medieval | Suffolk |
xml | csv json |
| Fragment of rim from a cast copper-alloy vessel. The exterior is fairly rough but the interior is smoothly polished. The rim is slightly thickened. | |||||
|
Scabbard | SF8497 |
Post medieval | Suffolk |
xml | csv json |
| Scabbard chape made from cast copper alloy, originally with a sheet copper-alloy backplate. The upper edge is now a little bent and broken, but was originally cut into an elaborate decorative shape. It is 28 mm wide; the chape then tapers to 25.5 mm wide and there is a heart-shaped cut-out in th... | |||||
|
Thimble | SF8496 |
Medieval | Suffolk |
xml | csv json |
| Large copper-alloy thimble. The unthickened rim is decorated with a single groove. The straight sides and conical top are covered with a spiral of circular hand-made indentations; when viewed from the top, the spiral runs clockwise. There are some splits and folds in the rim showing that it ha... | |||||
|
Strap fitting | SF8495 |
Medieval | Suffolk |
xml | csv json |
| Strap-end of composite type but made from just two sheets of copper alloy. 11 mm wide at the attachment end, it tapers to 9 mm wide before tapering more sharply to a cruciform terminal. One sheet is decorated with two saltires made from rocker-arm engraving. The sheets appear to be soldered to... | |||||
| Jetton | SF8485 |
Post medieval | Suffolk |
xml | csv json |
|
|
Bracelet | SF8506 |
Roman | Suffolk |
xml | csv json |
| One end of a narrow copper-alloy bracelet, now bent out of shape but otherwise in very good unworn condition. The rectangular terminal is slightly flattened and expanded, to 5 mm wide, and has a central circular hole. The hoop of the bracelet begins at 3 mm wide, with a raised transverse rectan... | |||||
|
Unidentified object | SF8526 |
Suffolk |
xml | csv json |
|
| Unidentified object made from cast copper alloy. The main component is a bar, D-shaped in cross-section, bent round to form half an oval. At one end there is a transverse ridge with roughened surface, perhaps a broken projection, and then beyond this the bar is flattened on the outside as if to... | |||||
|
Unidentified object | SF8525 |
Roman | Suffolk |
xml | csv json |
| Unidentified copper-alloy object, perhaps the bezel from a finger-ring. It is oval and measures 15.5 x 14 mm. It is flat, 2 mm thick, with bevelled edges giving a trapezoidal cross-section. Each face has a sunken centre; the smaller face is neatly made and is presumably designed to take a sett... | |||||
|
Unidentified object | SF8524 |
Suffolk |
xml | csv json |
|
| Two pieces of copper-alloy strip, 13 mm wide, each broken at a rivet hole at both ends. The holes are circular and 4 mm in diameter. The strips are each decorated with a row of punched circles nearly 2 mm in diameter which run down each long edge. The punch has a slightly straighter edge along... | |||||
|
Nail | SF8523 |
Suffolk |
xml | csv json |
|
| Possible copper-alloy nail or upholstery tack. The head is biconvex, 9 mm in diameter, and the upper half is more highly domed than the lower half. The total thickness of the head is 7 mm. In the centre of the lower half is a slim circular-section spike, now at an angle; it is about 9 mm long. ... | |||||
|
Nail | SF8522 |
Suffolk |
xml | csv json |
|
| Small copper-alloy nail or upholstery tack. The head is roughly circular, 11 mm in diameter. The shaft is 3 mm square in cross-section at the top and tapers to a point. It is now curved. Copper-alloy nails and upholstery tacks are difficult to date (the main two periods of use being Roman and... | |||||
|
Ring | SF8521 |
Medieval | Suffolk |
xml | csv json |
| Copper-alloy ring 20 mm in diameter. In cross-section it is rectangular with rounded corners, measuring 2 mm wide and 3 mm thick. On one face there are some faint transverse and oblique grooves which do not appear to be either functional or decorative. The metal is a greyish colour. Perhaps a ... | |||||
|
Strap fitting | SF8520 |
Suffolk |
xml | csv json |
|
| Flat circular copper-alloy mount, 19 mm in diameter. It is undecorated and now pitted with corrosion. The reverse has lots of small indentations, perhaps hammer marks, and an off-centre integral rivet 2.5 mm in diameter. The rivet has a burred-over end and brings the total thickness of the moun... | |||||
|
Weight | SF8519 |
Suffolk |
xml | csv json |
|
| Two thick circular copper-alloy discs, well made with right-angled corners and smooth surfaces. One is 19 mm in diameter and 6 mm thick; it weighs 14.2g (0.5 oz). The other is 15.5 mm in diameter and 5.5 mm thick; it weighs 8.76g (0.31 oz). There is no decoration and no official stamps on eith... | |||||
| Token | SF8518 |
Post medieval | Suffolk |
xml | csv json |
|
|
Button | SF8517 |
Post medieval | Suffolk |
xml | csv json |
| Large hollow silver biconvex button. The head is 18 mm in diameter and 12 mm thick. It is made from two pieces of silver sheet; the front has a central circular boss and the back has two neat circular holes for the release of hot gases during soldering. In the centre of the back is a loop with... | |||||
|
Button | SF8516 |
Post medieval | Suffolk |
xml | csv json |
| Cast lead-alloy button with remains of iron loop. The button is plano-convex, and a maximum now of 18 mm in diameter; most of the edges have now crumbled away. There is a boss in the centre of the curved front and two protruding iron wires on the flat back. | |||||
|
Button | SF8515 |
Post medieval | Suffolk |
xml | csv json |
| Nearly spherical hollow copper-alloy button. The curved front and the flat reverse are made from separate pieces of sheet, and the loop is made from a piece of circular-section wire. There is no decoration on the button although there is a dark grey coating, perhaps white metal. | |||||
|
Button | SF8514 |
Post medieval | Suffolk |
xml | csv json |
| Hemispherical hollow copper-alloy button. The curved front and the flat reverse are made from separate pieces of sheet, and the loop is made from a piece of circular-section wire. There is no decoration on the button. | |||||
|
Button | SF8513 |
Medieval | Suffolk |
xml | csv json |
| Two solid shiny white-metal biconvex buttons, one 9 mm and one 8 mm in diameter. Both have two stubs of copper-alloy wire, the remains of a loop, protruding from the reverse. The smaller button appears to be brittle and part of the back has broken away; the inside appears to be of the same colo... | |||||
|
Bird feeder | SF8512 |
Medieval | Suffolk |
xml | csv json |
| Small oval lead dish, now crushed flat. The base appears to measure about 34 x 25 mm, and has relief decoration; there is a border of short radiating lines, and then some pellets around the centre as well as a visible casting seam. The sides of the dish were perhaps 11 mm tall. These small lea... | |||||
|
Seal matrix | SF8511 |
Medieval | Suffolk |
xml | csv json |
| Cast lead blank for a seal matrix. It is circular and 25 mm in diameter, and on the reverse has a relief fleur-de-lis with tightly curled side petals. The stem of the fleur-de-lis rises up in a tall triangle which would presumably have eventually been drilled to provide a pierced lug. The othe... | |||||
|
Strap fitting | SF8510 |
Post medieval | Suffolk |
xml | csv json |
| Octagonal mount, now very worn. Some relief decoration can be seen, forming a central motif and possibly eight surrounding it, but no details can be made out. There is a large bent-over attachment spike on the reverse which is square in cross-section. | |||||
|
Strap fitting | SF8508 |
Roman | Suffolk |
xml | csv json |
| Pelta-shaped mount made of copper alloy, now rather corroded and with small areas missing. The pelta is a crescent with the concave side extended into a mushroom-like stem. The stem on this mount expands at the far end, and the corners are missing. One of the ends of the crescent is missing an... | |||||
|
Finger ring | SF8507 |
Roman | Suffolk |
xml | csv json |
| Copper-alloy finger-ring, now bent a little out of shape. It is essentially D-shaped, with a flat bezel, a sharp demarcation between the bezel and the shoulders, and a smooth curve to the hoop including the shoulders. The bezel is a long hexagon, a maximum of 10 mm wide, with an oval recess in ... | |||||
|
Spatula | SF8530 |
Roman | Suffolk |
xml | csv json |
| Cast copper-alloy handle from a wax spatula, in the shape of the goddess Minerva. The head has a helmet with large crest, a raised oval on each side, and either a substantial rim or a roll of hair beneath. The face has a worn nose and the eyes are just visible. There are no arms, and there are... | |||||
|
Coin | SF8529 |
Foreign | Suffolk |
xml | csv json |
| Coin | SF8528 |
Medieval | Suffolk |
xml | csv json |
|
| Coin | SF8527 |
Medieval | Suffolk |
xml | csv json |
|
781 - 810 of 3473 records.
Social Bookmarking: 
