Record ID: SF-2FEEE5
Object type: BOW BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Published
A copper alloy brooch fragment, Colchester derivative with double pierced lug spring attachment. Upper half only, missing spring and pin. The wing terminals are damaged. Corrosion products obscure the wings and the top of the bow. The bow has a D-section with a centre groove. Surviving width 17mm, surviving length 21mm. Type as Crummy (Colchester) 1983 no.53.
Created on: Wednesday 31st December 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Bedfield, Suffolk', grid reference and parish protected.

Record ID: SF-2FBFC2
Object type: BOW BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Published
Copper alloy brooch, Colchester derivative with rear hook spring attachment. Missing spring, pin, catchplate; damaged wings and corroded bow. Mouldings on wings - a beaded rib flanked by grooves and probably another rib at the ends. The bow is D-section and tapers slightly to a flat end. Two grooves along the centre, and traces of one or two other lines along the sides. In profile there is a sharp angle between the wings and underside of the bow. Width 20mm, length 50mm.
Created on: Wednesday 31st December 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Bedfield, Suffolk', grid reference and parish protected.

Record ID: BUC-2C40A5
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A copper alloy 'S' shaped buckle, 37.31mm long, in the frm of two swans necks emerging from a central band.
Created on: Wednesday 31st December 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Lt Missenden', grid reference and parish protected.

Record ID: BUC-1C14B7
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Published
A 54.70mm long hollow copper alloy tube, decorated with a large central ridge and three hollows either side. The widest part of the object measures 24.55mm.
Created on: Tuesday 30th December 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: BUC-1B7FB3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Published
A late medieval, rectangular copper alloy buckle. The curved frame, 33.56mm long and 26.4mm wide has four deep rabbets, bridged by a thin rod. Transverse grooves decorate each loop. The 3.06mm thick bar is damaged and there are traces of the iron tang.
Created on: Tuesday 30th December 2003
Last updated: Wednesday 6th June 2018
No spatial data available.

Record ID: BUC-1AF168
Object type: SCOOP
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Published
Copper-alloy scoop from a seed drill. A truncated conical object 6mm high, with the base and top of the cone replaced by semi circular depressions. The larger depression measures 20mm in diameter and the smaller one 16mm; these are presumably for scooping up seeds of two different sizes. The 7.23mm broken lug would have attached the scoop to the turning wooden centre of the seed drill.
Created on: Tuesday 30th December 2003
Last updated: Wednesday 11th December 2019
No spatial data available.

Record ID: BUC-1A09B7
Object type: VESSEL
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Published
A worn copper alloy cauldron or ewer foot, possibly in the form of a rather poorly defined paw. The break is triangular in sction. The fragment is 42.98mm long and 21.67mm across.
Created on: Tuesday 30th December 2003
Last updated: Monday 21st June 2021
No spatial data available.

Record ID: BUC-19D7F4
Object type: VESSEL
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A fragment of a large 3.39mm thick copper alloy vessel with a simple triangular rim.
Created on: Tuesday 30th December 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: BUC-195AF3
Object type: SPOON
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A small copper alloy spoon bowl measuring 39.56mm long by 19.11mm across. The 4.84mm of the square sectioned handle ends in a short triangular tail. The inner surface of the bowl is discoloured. This may be Roman, although the shape is more reminiscent of the eighteenth century. The spoons of that period tend to have have flat sectioned handles rather than square sectioned ones and longer rat's tails.
Created on: Tuesday 30th December 2003
Last updated: Saturday 28th January 2012
No spatial data available.

Record ID: BUC-1913F3
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation
A ridged copper alloy sheet rolled round into a tube. The edges are turned back into flanges. These were riveted but the 2.26mm rivet is missing.
Created on: Tuesday 30th December 2003
Last updated: Friday 15th November 2019
No spatial data available.

Record ID: BUC-18F143
Object type: FERRULE
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation
A copper alloy tube 7.95mm in diameter made from thin sheet metal, 29.06mm long. The end of the ferrule is decorated withfive evenly spaced incised rings. Above these are alternately placed holes.
Created on: Tuesday 30th December 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: BUC-18BEB2
Object type: MOUNT
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation
A narrow [15.21mm]copper alloy strip 33.76mm long. The object is decorated with two sets of six, raised concentric circles around the rivet holes. V shapes pointing in from the edges of ther strip frame edch set of circles. At one end of the strip two incised lines probably end the pattern. In the plain area below the lines a small square hole has been punched. The reverse is plain but for the rough edges of the rivet holes
Created on: Tuesday 30th December 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-177BF5
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Published
Pewter wine taster. Lathe turned, of fine quality and would appear to be comprimsed of 99% tin and 1% copper (antimony),no lead. It would have had a single lateral handle,now missing, but attachment hole is still evident. In the interior of the base there is cast decoration consisting of, two initials 'W' and 'B', there appears to be a third initial, but it is so worn that it is indecipherable.There is also a circle of raised dots with beading around the edge of the circle. The rest of the design is so worn that it is very hard to decipher. The vessel does not appear to have a maker's …
Created on: Tuesday 30th December 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LON-152E72
Object type: TOY
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Published
Brass gun (petronel) with expanded stock, rectangular trigger guard and long barrel which is now partly missing. It is decorated with ring-and-dot motifs on both sides.
Created on: Tuesday 30th December 2003
Last updated: Tuesday 8th November 2016
Spatial data recorded.

Record ID: BUC-086137
Object type: BRACELET
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation
Copper alloy Roman bracelet fragment measuring 18.94mm x 7.19mm. The rectangular strip is divided into two sections by an incised line. Each section is decorated with a double ring-and- dot motif. The reverse is plain.
Created on: Monday 29th December 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: BUC-07CD57
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
Composite copper alloy and Iron knife end cap. Remnant of Iron sheet material enclosed in an decorated oval copper jacket? With geometric dianganal lines on both faces of the copper alloy jacket. The "base" has a decoration consisting of three, incised, lines eminating from the edges and converging in middle, ie forming a complex cross.
Created on: Monday 29th December 2003
Last updated: Wednesday 13th November 2019
No spatial data available.

Record ID: BUC-056CC5
Object type: SEAL
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A rough lead circle 15.67mm diameter with a 4.5mm strip attached to it. One side has raised designs consisting of a curved line and seven pellets. The reverse has a slightly crinkled surface probably caused by the cooling of the casting
Created on: Monday 29th December 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: KENT-057372
Object type: RING
Broad period: ROMAN
County: Kent
Workflow stage: Published
Penannular ring form of twisted copper alloy strands.
Created on: Monday 29th December 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: KENT-055A74
Object type: RING
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Published
Ring or ferrule formed of interwoven strands of very thin silver wire. Rings of this type have been examined at the British Museum, where the opinion was tentatively given that they may be 19th century cane ferrules. However possible parallels include Viking dome-shaped mounts formed of interwoven or plaited silver wire, and a ring from the 'scourge' in the ninth-century Trewhiddle hoard.
Created on: Monday 29th December 2003
Last updated: Friday 27th November 2020
Spatial data recorded.

Record ID: KENT-036267
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Kent
Workflow stage: Published
Fragment of cast copper cake, part of dispersed Bronze Age hoard.
Created on: Monday 29th December 2003
Last updated: Tuesday 28th February 2012
Spatial data recorded. This findspot is known as 'Chislet', grid reference and parish protected.