Search results

Back to simple search | Back to advanced search

Map results Login or register so you can export data

    You searched for:

    • Created: Monday 17th November 2008
  • Thumbnail image of SF-1A1043

Record ID: SF-1A1043
Object type: FINGER RING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find validated and published by finds advisers
A gold finger ring of Medieval date. It has a simple undecorated wire hoop that expands at the shoulders and opposite the bezel narrows, perhaps partly due to use wear. The hoop is slightly misshapen and this appears to also be the result of usage rather than post-depositional damage. At the junction of hoop and bezel are prominent transverse rectangular ridges. The bezel itself is sub-rectangular in plan with two long tapering sides that have a short straight side at the base end and a wider, curved top end. In profile the bezel is sub-lozenge shaped with flattened base and top. The …
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Little Blakenham', grid reference and parish protected.

  • Thumbnail image of NMS-1A44A7

Record ID: NMS-1A44A7
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation Find waiting to be validated
Romano British disc brooch, tinned, traces of blue enamel decoration. Total diameter 33mm. Central circle c. 9mm in diameter, recessed for possible (missing) setting around which is a plain tinned band c. 3mm in width, surrounded by a circle of 22 pellets, a further plain band, and the outermost band consists of hemispherical pellets. Catchplate on reverse projects further than the diameter of the brooch, iron corrosion adhering to double pin lug. See Hattatt no.1564, 2nd century.
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Icklingham', grid reference and parish protected.

  • Thumbnail image of IOW-1A3EE6

Record ID: IOW-1A3EE6
Object type: COIN
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Published Find validated and published by finds advisers
A complete Roman Republican silver denarius of Mark Antony (Marcus Antonius); LEG X; Eagle (Aquila) between two standards; Travelling mint, 32/31BC. RRC p. 540, no. 544/24.
Created on: Monday 17th November 2008
Last updated: Monday 21st March 2011
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

  • Thumbnail image of NMS-1A0016

Record ID: NMS-1A0016
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find waiting to be validated
Middle/Late Saxon hooked tag, circular, 12.5mm diameter, central perforation in centre of ring and dot, 4 ring and dots and two perforations in outer border.
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Icklingham', grid reference and parish protected.

  • Thumbnail image of IOW-19F400

Record ID: IOW-19F400
Object type: COIN
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Published Find validated and published by finds advisers
A complete copper alloy sestertius of Commodus (180-192); [ ], S C; Fortuna seated left holding cornucopiae and rudder on globe; Rome, 186-188. RIC III, pp. 423 & 425, nos. 493/513.
Created on: Monday 17th November 2008
Last updated: Monday 21st March 2011
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

  • Thumbnail image of HAMP-19F241

Record ID: HAMP-19F241
Object type: PILGRIM BADGE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find waiting to be validated
A broken and corroded lead-alloy late medieval pilgrim badge (15th century AD). The object would have originally been a flat, pointed oval badge, probably surrounded by a mandorla; damage has resulted in bends, the loss of around a third of the artefact and abrading to the edges. The upper surface is moulded in low relief and depicts a lady facing in a long dress. Her arms are bent at the elbows with the hands joined together, probably in prayer. The figure is missing their head; if they are a female saint holding an attribute the latter is indiscernible, and arguably absent. She i…
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

  • Thumbnail image of NMS-19CE40

Record ID: NMS-19CE40
Object type: STRAP FITTING
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find waiting to be validated
Romano British belt stiffener, propeller shaped, 40mm x 20mm, with thick, square-sectioned median rib perforated by drilled circular hole through the triangular-shaped flaring extension at each end. The central circular section has a serrated edge and is decorated with a single ring and dot motif on each lobe. Late 4th-5th century, similar to MacGregor, A. and Bolick, E. (1993) no.36.8.
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Quidenham', grid reference and parish protected.

  • Thumbnail image of HAMP-19E403

Record ID: HAMP-19E403
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find waiting to be validated
A copper-alloy medieval harness pendant of unusual composite construction. The pendant is square, with a perforated suspension loop protruding from the centre of its upper surface. The back of the loop is flush with the integral back plate, while the upper part protrudes forwards. It curves back round in a shallow arc with a notch above the plate. Emerging from the centre of the upper surface of the lower plate is a separate fitting riveted in place consisting of four prongs bent round on themselves into a claw; two of the prongs are truncated and bent back slightly. They retain wh…
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

  • Thumbnail image of SOM-19C702

Record ID: SOM-19C702
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Somerset
Workflow stage: Awaiting validation Find waiting to be validated
A flint thumbnail scraper, made from a retouched tertiary waste flake. The ventral face is very slightly convex and the bulb of purcussion appears to have been removed by a recent break. The dorsal face has three flaking scars, surrounded on three edges by semi-abrupt to abrupt retouch. The distal end has a slightly rolled edge resulting from later damage probably through ploughing or similar action. There is a large flake missing at the proximal end, which appears to have occured naturally following deposition. The flint is green-grey-whitish in colour, with a milky patina which has o…
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Near Corton Denham', grid reference and parish protected.

  • Thumbnail image of HAMP-19C5B2

Record ID: HAMP-19C5B2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find waiting to be validated
An unusual composite copper-alloy mount of probable post-medieval date and possible foreign provenance. The object consists of a flat circular backplate with openwork trefoil protrusion. Attached to this is an upper plate featuring a central convex dome. At three cardinal points are integral cylindrical 'turrets'; there is a perforation at the fourth. These turrets feature white adhesive uppermost and may have taken glass settings. There is a further turret in the centre of the dome. The dome is decorated with three defined areas of stippling. The border around is decorated with a…
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

  • Thumbnail image of HAMP-19B0F2

Record ID: HAMP-19B0F2
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find waiting to be validated
A lead-alloy post-medieval cloth seal from the Low Countries (16th to 17th century AD). This upper disc is sub-circular and on its upper surface features a design stamped in low relief. It depicts a haloed St Peter standing facing right holding a large key in each hand. Within a beaded border is the partial inscription: 'ST?... PEETER'. The disc was not large enough to take all of the stamp and as a result most of the border is not included. The inner face has a zigzag imprint of fabric - a striped twill. The stub of a loop survives just off centre. The representation of St Peter and …
Created on: Monday 17th November 2008
Last updated: Monday 11th June 2012
Spatial data recorded.

  • Thumbnail image of NMS-19A7F3

Record ID: NMS-19A7F3
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find waiting to be validated
Unusual Roman British brooch, rearward hook and spring housing, wingspan >17mm, similar to Aesica type brooches such as Hattatt no.1474, with central concentric lozengiform mouldings, 22.5 x 18.5mm, protruding to 6mm in thickness, reminiscent of a plate brooch such as Hattatt no. 1085. Foot of brooch missing, although this may have been flaring in the manner of an Aesica brooch, 1st century.
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Quidenham', grid reference and parish protected.

  • Thumbnail image of LANCUM-193F35

Record ID: LANCUM-193F35
Object type: BELL
Broad period: POST MEDIEVAL
County: Cumbria
Workflow stage: Awaiting validation Find waiting to be validated
Small cast cu-alloy vessel fragment, probably the upper part of a bell, dating from the late post-medieval or modern period. The surface is corroded and the vessel's original colour and decoration are now indeterminable. It might be the upper part of a bell because of the thinly cast, heavily tinned cu-alloy and also, the hole which is in the centre of the top of the object. This would have been the hole though which the clapper was inserted from the inside. The clapper is now missing. The object could have been a sheep, goat's or small cow bell.
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Cockermouth', grid reference and parish protected.

  • Thumbnail image of NMS-198662

Record ID: NMS-198662
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find waiting to be validated
Early Saxon fragment of radiate-headed brooch footplate, perforated side lappet and fragment of catchplate on reverse. Sinuous ribbon-like decoration, with concentric lozenges, the outermost decorated with transverse lines. Similar to Kühn, H. (1974) ‘Die Germanischen Bügelfibeln der Völkerwanderungszeit in Süddeutschland’, number 12,70.
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Quidenham', grid reference and parish protected.

  • Thumbnail image of WMID-197567

Record ID: WMID-197567
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find waiting to be validated
An incomplete cast copper alloy strap/harness mount, probably from the post-medieval period (c.1500-c.1800). Length: 18.7mm; width: 11.8mm; measurement from front to reverse (including prongs): 3.8mm; mass: 1.3g. The mount is shaped as an acorn within its cup, with a knop at the top. There are a series of depressions providing detail on the cup. The front of the mount is concave and the reverse is convex, with two incomplete prongs for attachment. The mount has a pitted brown/green surface. Similar mounts have been recorded on the PAS database (e.g. see BH-5626A6, WMID-096071) and …
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Hunningham', grid reference and parish protected.

  • Thumbnail image of HAMP-192556

Record ID: HAMP-192556
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find waiting to be validated
A cast copper-alloy stirrup-strap mount of late Anglo-Saxon date (c. 11th century AD). The mount is sub-pentagonal in form with a knobbed profile. It has a wide rounded apex loop. From this it widens to its maximum width (28.0mm) at the uppermost pair of side knobs. Below is a further pair of knobs above the straight base. Above the base are two circular perforations, both of these retain corroded iron rivets. The third rivet hole can be found at the apex loop, empty. On the lower face the perpendicular flange is very slight (Th.: 5.8mm). The lower surface is plain, slightly recessed …
Created on: Monday 17th November 2008
Last updated: Saturday 1st June 2013
Spatial data recorded.

  • Thumbnail image of NMS-1910E2

Record ID: NMS-1910E2
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find waiting to be validated
Middle/Late Saxon hooked tag, circular sectioned hook tapering from steeply pointed lower half decorated with eight stamped ring and dots, broken across two circular apertures, none of original top edge surviving. Maximum surviving width 13.5mm.
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Quidenham', grid reference and parish protected.

  • Thumbnail image of SOM-192254

Record ID: SOM-192254
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find waiting to be validated
Copper alloy nummus of the House of Constantine, VRBS ROMA, mint of Trier, 330-331, RIC (vol.VII, p.215, no.529)
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Near Milborne Port', grid reference and parish protected.

  • Thumbnail image of HAMP-190EC5

Record ID: HAMP-190EC5
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find waiting to be validated
A pin cast in copper alloy of early-medieval date (mid Anglo-Saxon). The pin has a polyhedral head (13.05 x 9.5 x 7.8mm), formed from a cuboid with its corners cut off; the triangles and lozenges thus formed are not regular. The four lozengiform fields round the edges are decorated with four and three punched ring and dots, respectively on the larger and smaller faces. Each of the triangular faces feature a single punched ring and dot; the uppermost surface is completely plain. Directly below the head is a collar. The circular-sectioned shaft continues beyond this until it is broken…
Created on: Monday 17th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

  • Thumbnail image of IOW-18A1E4

Record ID: IOW-18A1E4
Object type: BROOCH
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Published Find validated and published by finds advisers
CORONER'S REPORT A complete silver annular brooch of Medieval date, 13th-15th century. Description The frame slightly convex in section, but otherwise plain, with a raised and thickened ridge on either side of the constriction for the pin, which survives.
Created on: Monday 17th November 2008
Last updated: Monday 29th October 2012
Spatial data recorded. This findspot is known as 'Niton', grid reference and parish protected.

Records per page: 10 20 40 100

Only results with images:
on off

Sort your search by:

Which direction? descending | ascending

Total results available: 90
Server farm key: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 659
  • Mean quantity: 7.322
  • Standard deviation: 57.436
  • Maximum quantity (one record): 546
  • Minimum quantity (one record): 1
  • Sum of squares: 298427

Filter or refine your search

1 - 20 of 90 records.

This page is available in: json xml rdf rss atom kml geojson qrcode midas representations.

Social Bookmarking: