Search results
You searched for:
Your search returned 305 results. You are viewing 121 - 150.
| Image | Object Type | Find number | Broadperiod | County | Actions |
|---|---|---|---|---|---|
|
Coin | SF8958 |
Early medieval | Suffolk |
xml | csv json |
|
Pendant | SF9078 |
Early medieval |
xml | csv json |
|
| Flat cross-shaped pendant made from copper alloy and now rather corroded. Each arm of the cross flares from the centre; the centre is decorated with a single ring-and-dot motif. One of the side arms is shorter than the other, but both are identically shaped with the outer edge incurved. The lo... | |||||
|
Brooch | SF8200 |
Early medieval | Suffolk |
xml | csv json |
| Copper-alloy small-long brooch. The end of the foot is missing and the brooch is very abraded. The headplate was probably originally rectangular, with three mushroom-shaped knobs formed by taking two semi-circular cut-outs from the base of semi-circular projections. There is a double groove ac... | |||||
|
Bridle fitting | SF8198 |
Early medieval | Suffolk |
xml | csv json |
| Copper-alloy bridle cheekpiece. Still complete and in good condition, it is cross-shaped with four arms extending from a central boss. The boss is a truncated cone in shape, 17 mm in diameter at the base and with a flat top 9 mm in diameter; it is 15 mm tall and the reverse is slightly hollowed... | |||||
|
Brooch | SF8505 |
Early medieval | Suffolk |
xml | csv json |
| Small and battered copper-alloy ansate brooch. One end, together with the catchplate, is missing. The other end is irregularly rounded and probably very worn; on the reverse is a double pin bar lug which is broken through both lugs. There does not appear to be any decoration at the angle betwe... | |||||
|
Sleeve clasp | SF8504 |
Early medieval | Suffolk |
xml | csv json |
| Copper-alloy bar from a wrist-clasp, which would originally have been soldered to a separate plate. It is oval in cross-section and one face is decorated with equally spaced grooves and ridges giving a ribbed effect. Separate bars of this kind are found on Hines's Forms B13a, B14a, B17a; they d... | |||||
|
Sleeve clasp | SF8503 |
Early medieval | Suffolk |
xml | csv json |
| Clasp-half from a wrist-clasp of Hines's Form B20, almost certainly a catchpiece. 33 mm long and 15 mm wide, it consists of a plate and flat 'bar' cast in one piece. The bar is at the front edge, and is barely thicker than the rest of the clasp-half; it is distinguished by having decoration of t... | |||||
|
Strap fitting | SF8220 |
Early medieval | Suffolk |
xml | csv json |
| Small strap-end made from two pieces of corroded copper-alloy sheet. Both pieces are roughly the same shape; they are joined together at one end by a large corroded copper-alloy rivet, and perhaps some solder as well. The plates are widest (8.5 mm wide) at the riveted end, and taper to 4 mm wid... | |||||
|
Pin | SF8221 |
Early medieval | Suffolk |
xml | csv json |
| Head and top of shaft from a pin. The head is made from copper alloy. It is in the form of a cuboid measuring 7 mm square in cross-section and 10 mm long, with the corners cut off. On three of the four main lozenge-shaped faces are five dots drilled in a quincunx and filled with a white materi... | |||||
|
Stirrup | SF8238 |
Early medieval | Suffolk |
xml | csv json |
| Cast copper-alloy stirrup terminal with relief decoration in the form of an animal head, of the type which Williams (FRG Datasheet 24, 1997) calls 'snub-nosed' (fig. 2). It has a C-shaped cross-section with hollow reverse to take the stirrup. At the top is a low ridge, part of which is broken a... | |||||
|
Brooch | SF8237 |
Early medieval | Suffolk |
xml | csv json |
| Headplate from a copper-alloy cruciform brooch. Both the central panel and the wings are nearly rectangular, the central panel flaring slightly downwards and the wings flaring slightly upwards. The wings have a stamped border around three sides; each stamp consists of a V shape with a part-circ... | |||||
|
Unidentified object | SF8073 |
Early medieval | Cambridgeshire |
xml | csv json |
| Flat copper-alloy mount from an unidentified object, consisting of a circle 12 mm in diameter with a broken projection flaring from 4 to 4.5 mm wide extending from one side. There is a border of dot-in-crescent stamps which runs around the circle and onto either edge of the projection. On the r... | |||||
|
Bridle fitting | SF8889 |
Early medieval | Suffolk |
xml | csv json |
| One end from a copper-alloy bridle cheekpiece. Externally it is a wide lozenge with a knob at three of the corners; internally it has a roughly oval or D-shaped perforation. The fourth corner of the lozenge is extended into a flattish oval-section arm of which only a short length survives; the ... | |||||
|
Bridle fitting | SF8888 |
Early medieval | Suffolk |
xml | csv json |
| Copper-alloy bridle cheekpiece fragment in the form of a Ringerike-style animal head. At one end is a fragment of broken loop; the break is old and worn. The neck of the animal then curves up and round, with a lappet or ear at the top. The head continues the curve, and has a crest of one large... | |||||
|
Stirrup | SF7017 |
Early medieval |
xml | csv json |
|
| Stirrup terminal made from cast copper alloy. At the top it is a semi-cylindrical tube, originally measuring c. 10 mm wide by 6 mm deep but now with one corner broken off. There is a groove around the open top of the tube. At the bottom it angles out to become rectangular in cross-section, jus... | |||||
| Brooch | SF6912 |
Early medieval | Cambridgeshire |
xml | csv json |
|
| Head and bow of large florid cruciform brooch. The headplate is very nearly rectangular, measuring 30 mm wide at the top and 32 mm wide at the bottom; it is 25 mm deep and the corners are very sharp. A raised panel runs from top to bottom across the headplate and flares from 16 to 18.5 mm wide.... | |||||
| Brooch | SF6880 |
Early medieval | Suffolk |
xml | csv json |
|
| Fragment of lead-alloy nummular brooch. Just a tiny scrap of the edge survives, with relief decoration consisting of a border of ladder pattern, an inner border of pellets, and an inner field of geometrically intersecting straight lines. On the reverse is a transverse pin lug. These brooches a... | |||||
| Pin | SF6879 |
Early medieval | Suffolk |
xml | csv json |
|
| Copper-alloy pin, apparently complete. The head is a relatively large cube with the corners cut off; the cube measures 7 x 7 mm and is 8 mm thick. The edges of the head are worn down and there does not appear to be any surviving decoration. Beneath the head, the circular-section shaft begins i... | |||||
| Strap fitting | SF6764 |
Early medieval | Suffolk |
xml | csv json |
|
| Openwork copper-alloy strap-end. The attachment end is not split or stepped, but is the same thickness as the body of the strap-end and has a single central rivet hole which cuts through a pair of transverse grooves, one wider than the other. Between the grooves and the edge, at right angles to... | |||||
| Brooch | SF6709 |
Early medieval | Suffolk |
xml | csv json |
|
| Head and bow from a small-long brooch. The headplate is rectangular, 26 x 20 mm, and is highly decorated. Around the edge is a border of large unworn double-chevron stamps, and projecting upwards from the upper end of the bow is a small, fairly high, trapezoidal raised panel. In the middle of ... | |||||
| Key (locking) | SF6706 |
Early medieval | Essex |
xml | csv json |
|
| Copper-alloy slide key. The bow is incomplete, but was originally perhaps lozengiform with an oval perforation which has worn through resulting in the loss of the outer corner. The bow is small and flattened compared to the solid circular-section stem, which is 6.5 mm in diameter. From the end... | |||||
| Brooch | SF6689 |
Early medieval | Cambridgeshire |
xml | csv json |
|
| Head and bow from a small-long brooch. The headplate is sub-rectangular, 16 mm deep at one side and 18 mm deep at the other, and 22.5 mm wide. In the middle, slightly off-centre, is a raised square panel. The upper corners are extended into large outward-curving horn-like projections. The sur... | |||||
| Sleeve clasp | SF6686 |
Early medieval | Cambridgeshire |
xml | csv json |
|
| Catchpiece from a copper-alloy wrist-clasp of Hines's Form B12. It consists of a straight bar 5.5 mm wide, 32 mm long and 2.5 mm thick. There are two panels with wide bevelled edges leaving three thick flat panels; on the rear edge of each thick flat panel is a thinner D-shaped lug, perforated ... | |||||
|
Vessel | SF6626 |
Early medieval | Suffolk |
xml | csv json |
| Large rim sherd of shelly-tempered early Anglo-Saxon ware, around 7 mm thick. The rim is a simple turned-out shape. | |||||
| Vessel | SF6625 |
Early medieval | Suffolk |
xml | csv json |
|
| Two body sherds of sandy-tempered early Anglo-Saxon ware, both around 11 mm thick. | |||||
|
Vessel | SF6624 |
Early medieval | Suffolk |
xml | csv json |
| Rim sherd and two body sherds of organic-tempered early Anglo-Saxon ware. The rim sherd is sooted on the exterior. All are around 6 mm in thickness. | |||||
|
Strap fitting | SF6617 |
Early medieval | Suffolk |
xml | csv json |
| Small strap-end made from two pieces of copper-alloy sheet. One end is 7 mm wide and cut straight across, and here the two pieces are held together by a single copper-alloy rivet. Both sheets then flare slightly to 8 mm wide, and one is decorated with a longitudinal row of four ring-and-dot mot... | |||||
| Brooch | SF6616 |
Early medieval | Suffolk |
xml | csv json |
|
| Fragment of head from a small-long brooch, made of thin copper alloy. Part of the headplate survives, with a straight upper edge; all other edges are broken and there is no surviving decoration. Projecting from the upper edge is a large mushroom-shaped flat "knob", 13 mm wide. Two rectangular ... | |||||
|
Weight | SF6604 |
Early medieval | Suffolk |
xml | csv json |
| Thick flat circular copper-alloy weight, 20 mm in diameter and 7 mm thick. A thick brown surface patina is occasionally broken to show bright green corrosion beneath. There are purposeful markings on both faces, consisting of a variety of short straight grooves and scratches set at a variety of... | |||||
| Ingot | SF6590 |
Early medieval | Suffolk |
xml | csv json |
|
| Probable Viking-age ingot of corroded green metal, perhaps base silver, copper, or copper alloy. 46 mm long, it gently swells from rounded ends to a sub-rectangular cross-section measuring 6.5 x 6 mm. All faces have hammering marks, and one face has distinct transverse flutes. It is therefore ... | |||||
Social Bookmarking: 
