2000-09-22 00:00:00 Helen Geake hgeake 2011-02-24 12:19:48 Daniel Pett dpett SF3527 BUTTON Lead-alloy button. The alloy may be pewter, as the edges of the button are laminating; it was probably originally circular. The relief design on the flat front is rather crudely made. It shows a profile bust of a crowned king, presumably Charles II. The top of the crown is missing, but there are two crosses on its lower half and a band of ladder pattern around the base. From the crown to the bottom of the button is a length of wavy hair; in front of this the details are harder to discern but probably include a face above a wide projecting ?arm. There is a C in front of the face and an R behind the hair; both initials sit on lines with ?pellets below. On the reverse is a stub of broken-off loop. Diameter originally at least 26 mm. Lead-alloy button. The alloy may be pewter, as the edges of the button are laminating; it was probably originally circular. The relief design on the flat front is rather crudely made. It shows a profile bust of a crowned king, presumably Charles II. The top of the crown is missing, but there ... This record was created before the Portable Antiquities Scheme began using the Central Database. We are aware that this record may fall below our usual standards of recording, and we are working to rectify this. Lead Alloy POST MEDIEVAL POST MEDIEVAL 1649 1685 26 4 2000-09-22 00:00:00 NORFOLK BRECKLAND POINT( ) TL78NE TL7987 29.06.2003 Metal detector 1 FAHG Creative Commons Non Commercial Share Alike - The Portable Antiquities Scheme 2000 These records can be reproduced in a non commercial enviroment as long as the original recorder is cited. The Portable Antiquities Scheme info@finds.org.uk No fees are applicable.